« previous next »
Pages: [1]   Go Down

Author Topic: Rochester identification headache.(now with pics)  (Read 3778 times)

Offline overthepond

  • Frequent Member
  • **
  • Posts: 291
Rochester identification headache.(now with pics)
« on: June 06, 2008, 05:02:24 pm »
Time to ask the people in the know i hope.. ;D
I have a nice clean unmolested rochester carb sitting on the shelf in my hut that came with my k5's engine and i'm having nothing but trouble finding a rebuild kit for it.
I have the only numbers that i can find on the carb on a round disc which is pressed into an indent in the side of the bowl directly behind the primary throttle arm.

As it reads on the disc...7026261k5

Could anyone point me in the right direction for a rebuild kit for the above number.

Thanks... ;)
« Last Edit: June 07, 2008, 01:20:16 pm by overthepond »
Logged
Dave
When all else fails...try again.

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19167
Re: Rochester identification headache.
« Reply #1 on: June 07, 2008, 12:27:25 pm »
clean the carburetor off better and look along the side of the main body housing. I think you have the wrong #
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline overthepond

  • Frequent Member
  • **
  • Posts: 291
Re: Rochester identification headache.
« Reply #2 on: June 07, 2008, 01:04:09 pm »
Thanks for getting back Vile,thats what i thought when noting the number down but where the number usually is on these carbs it is blank,i'll pop out now and get some pics of the silver disc and any other markings on the body.

Here are the pics
Where the number usually is..

silver pressed disc


« Last Edit: June 07, 2008, 01:18:08 pm by overthepond »
Logged
Dave
When all else fails...try again.

Offline overthepond

  • Frequent Member
  • **
  • Posts: 291
Re: Rochester identification headache.(now with pics)
« Reply #3 on: June 09, 2008, 03:53:59 am »
Anyone... ???
Logged
Dave
When all else fails...try again.

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19167
Re: Rochester identification headache.(now with pics)
« Reply #4 on: June 09, 2008, 06:30:12 am »
your pics don't really show anything that could help you. If you want to take pics of each side of the carb that would help.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline frogman68

  • Junior Member
  • ***
  • Posts: 773
Re: Rochester identification headache.(now with pics)
« Reply #5 on: June 09, 2008, 07:53:56 am »
Think this it just had to drop the K5

http://www.carburetor.ca/carbs/kits/CK023.htm
Logged

Offline overthepond

  • Frequent Member
  • **
  • Posts: 291
Re: Rochester identification headache.(now with pics)
« Reply #6 on: June 09, 2008, 10:21:39 am »
Quote from: frogman68 on June 09, 2008, 07:53:56 am
Think this it just had to drop the K5

http://www.carburetor.ca/carbs/kits/CK023.htm

Thats the one,i'll place my order now and get it rebuilt and back on the engine,after all it ran fantastic with it on even though it had a leak....miles better than the holley 600 that is now going in the trash.

Many thanks frogman68 and vile... ;)
Logged
Dave
When all else fails...try again.
Pages: [1]   Go Up
« previous next »