« previous next »
Pages: [1]   Go Down

Author Topic: turn signal indicators  (Read 5695 times)

Offline Thermal Izod

  • Newbie
  • Posts: 86
turn signal indicators
« on: September 24, 2008, 12:22:20 am »
what r the turn signal indicators on the dash?  light bulbs?  I ask b/c one of mine stopped lighting, though the signal is still on.....

82 K10
Logged
1982 Shortbed K10 Silverado.  305 ci with a mild cam, full true dual exhaust (Long tube headers, "H" pipe, and Thrush Turbo mufflers.  4x4, and otherwise completely stock.  about 153,000 miles.

Offline Dragon

  • Junior Member
  • ***
  • Posts: 642
Re: turn signal indicators
« Reply #1 on: September 24, 2008, 03:28:33 am »
Should be a 168, and can be a pain to remove from the back of the cluster, if it has never been changed before.....
Logged
Dragon
08 Magnum-New Toy
96 Caprice 9C1-Who Knows
96 GMC ECLWB & 92 Chevy ECLWB
77 GMC K25 HS-Gone but Not Forgotten

Offline Thermal Izod

  • Newbie
  • Posts: 86
Re: turn signal indicators
« Reply #2 on: September 24, 2008, 09:03:21 am »
thanks dragon
Logged
1982 Shortbed K10 Silverado.  305 ci with a mild cam, full true dual exhaust (Long tube headers, "H" pipe, and Thrush Turbo mufflers.  4x4, and otherwise completely stock.  about 153,000 miles.

Online Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18454
    • http://www.73-87chevytrucks.com
Re: turn signal indicators
« Reply #3 on: September 24, 2008, 10:24:45 am »
Depending on where it is located and how big or small your arm is, you may need to remove the cluster to replace them.  If you do, I would replace all of them while you had it out.  It is not easy to twist them in except for maybe the lower ones.
Logged

Offline ccz145a

  • Senior Member
  • ****
  • Posts: 1393
Re: turn signal indicators
« Reply #4 on: September 24, 2008, 10:36:10 am »
Oh, and test the new bulbs BEFORE you put them in. Ask me how I know ;)
Logged
1975 C10 Silverado LWB, 454CID, TH400, 10bolt 3.42
11MPG Downhill w/tailwind (but there ain't no hills here)

Offline JJSZABO

  • Senior Member
  • ****
  • Posts: 1009
Re: turn signal indicators
« Reply #5 on: September 24, 2008, 11:16:32 am »
Quote from: ccz145a on September 24, 2008, 10:36:10 am
Oh, and test the new bulbs BEFORE you put them in. Ask me how I know ;)

 :D :D  I am glad I am not the only one
Logged
Jeff

86 Chevy C-10
350, TH400
Ex father and son project (son lost interest)

Son regained interest when truck was almost completed

Offline Dragon

  • Junior Member
  • ***
  • Posts: 642
Re: turn signal indicators
« Reply #6 on: September 24, 2008, 01:03:34 pm »
Quote from: ccz145a on September 24, 2008, 10:36:10 am
Oh, and test the new bulbs BEFORE you put them in. Ask me how I know ;)
Sometimes you can get a different position on te bulb, or even the bulb mounting base that won't work one way, but you can rotate either 180, and it will work fine......  I know my Old '89 K2500,Dad's '76 C20,My '86 & '87 Buicks,'79 Monte, and '96 Caprice were all picky when it came to the dash lights.....
Logged
Dragon
08 Magnum-New Toy
96 Caprice 9C1-Who Knows
96 GMC ECLWB & 92 Chevy ECLWB
77 GMC K25 HS-Gone but Not Forgotten

Offline Skunksmash

  • Senior Member
  • ****
  • Posts: 1398
Re: turn signal indicators
« Reply #7 on: September 25, 2008, 03:21:55 am »
Yes it is in fact a light bulb. I replaced mine one time cause it went out just like yours did. Do not lose the little green piece of plastic that goes in front of the bulb or you will be going to the junk yard for a new one. I forgot to put mine back on and it was blinding light coming out of there without it. I also put LED lights in there one time and that was also way to bright.
Logged
Pages: [1]   Go Up
« previous next »