« previous next »
Pages: [1]   Go Down

Author Topic: pipes after headers  (Read 9209 times)

Offline murraygmc

  • Frequent Member
  • **
  • Posts: 301
  • 85 gmc 4x4
pipes after headers
« on: September 17, 2009, 11:23:41 am »
Ok , iv got a 305 and i need to put some pipes on it and  im thinking im goina use these headers http://www.summitracing.com/parts/SUM-G9006-9/ but what should i do after that i have a 85 4x4 4speed with granny low that im liftin later this winter probly with a rough country 4" sup lift http://www.roughcountry.com/chevy_4wd_77-87_4.html could i use a  h pipe i have no state tests i have to go through so my opitions are open ........im not wanting to wake the naborhood up when i leave but ............if i wanted to hear my pipes at any time i want to b able to ......... so im goina leave this open for ideas
thanks Matt
Logged
85 gmc high serria 4x4

Offline bmaier

  • Registered Users
  • *
  • Posts: 215
Re: pipes after headers
« Reply #1 on: September 17, 2009, 07:23:36 pm »
Logged
Are you just gonna lay there and bleed or are you gonna cowboy up?

1979 Chevy Bonanza K10, Shortbox, 350/350, 4" lift, 35's
1979 Chevy Silverado C10, Shortbox, 305/350

Offline murraygmc

  • Frequent Member
  • **
  • Posts: 301
  • 85 gmc 4x4
Re: pipes after headers
« Reply #2 on: September 21, 2009, 10:54:31 am »
i just whent to the 28th Annual O'Reilly Auto Parts Fall 4-Wheel Jamboree Nationals it was SWEET 4-wheel drive mag was there and i bought a set of headmen headers 4 my 305 nothing fancy just black painted,ups should have them at my house by thursday , mufler shop wants 450 to install them and run stanless 2.5 pipes  and flowmaster  muflers   ,is that a good deal?
Logged
85 gmc high serria 4x4

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18460
    • http://www.73-87chevytrucks.com
Re: pipes after headers
« Reply #3 on: September 21, 2009, 06:18:21 pm »
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19177
Re: pipes after headers
« Reply #4 on: September 21, 2009, 06:46:57 pm »
You should get the headers coated or they're gonna rust quick. You shoulda gone with the coated ones to begin with. $450 is a good price. The X pipe kit is a nice option too.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline choptop

  • Senior Member
  • ****
  • Posts: 2476
  • Extended cab fanatic
    • conversiontrucks
Re: pipes after headers
« Reply #5 on: September 21, 2009, 08:28:34 pm »
Quote from: VileZambonie on September 21, 2009, 06:46:57 pm
You should get the headers coated or they're gonna rust quick. You shoulda gone with the coated ones to begin with. $450 is a good price. The X pipe kit is a nice option too.
Ill never run uncoated headers again. Well worth the money. $450 installed definately sounds like a good deal. The x-pipe kit is the way Id go, but Id also prefer to install my own headers. That way I know its right.
Logged
76 C10 Choptop,76 C10 Swb
85 C10, 85 K10, 85 K20,86 C10,86 K10 (all extended cabs)
86 C30 extended crewcab

Offline murraygmc

  • Frequent Member
  • **
  • Posts: 301
  • 85 gmc 4x4
Re: pipes after headers
« Reply #6 on: September 22, 2009, 08:39:34 am »
coated ? with what ?........and i was under the impresion the x kit didnt work on the 4x4?   how dose the kit come out the rear?
Logged
85 gmc high serria 4x4

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18460
    • http://www.73-87chevytrucks.com
Re: pipes after headers
« Reply #7 on: September 22, 2009, 02:25:32 pm »
sorry our kit doesn't work on 4x4s.  I just posted that for a comparison.

I would get coated headers also.  Being some type of ceramic/barrier coating.
Logged

Offline murraygmc

  • Frequent Member
  • **
  • Posts: 301
  • 85 gmc 4x4
Re: pipes after headers
« Reply #8 on: September 22, 2009, 03:40:57 pm »
o....iv alrety bought a set of headers  :-\
Logged
85 gmc high serria 4x4

Offline murraygmc

  • Frequent Member
  • **
  • Posts: 301
  • 85 gmc 4x4
Re: pipes after headers
« Reply #9 on: September 23, 2009, 01:09:50 pm »
what if i sprayed them with high heet paint wouldent that keep them from rusting out ?
Logged
85 gmc high serria 4x4

Offline choptop

  • Senior Member
  • ****
  • Posts: 2476
  • Extended cab fanatic
    • conversiontrucks
Re: pipes after headers
« Reply #10 on: September 23, 2009, 03:00:55 pm »
Quote from: murraygmc on September 23, 2009, 01:09:50 pm
what if i sprayed them with high heet paint wouldent that keep them from rusting out ?
for about a month maybe. You can still have them ceramic coated. Check for local coating businesses. I saved enough in spark plug wires, to pay for the coating,
Logged
76 C10 Choptop,76 C10 Swb
85 C10, 85 K10, 85 K20,86 C10,86 K10 (all extended cabs)
86 C30 extended crewcab

Offline murraygmc

  • Frequent Member
  • **
  • Posts: 301
  • 85 gmc 4x4
Re: pipes after headers
« Reply #11 on: September 25, 2009, 06:39:34 am »
ok yhanks chop top   but i live in a verry rual area ......
Logged
85 gmc high serria 4x4
Pages: [1]   Go Up
« previous next »