« previous next »
Pages: [1]   Go Down

Author Topic: transmission  (Read 3771 times)

Offline hotrod24

  • Senior Member
  • ****
  • Posts: 1696
transmission
« on: February 17, 2010, 08:25:30 pm »
hey I have a 350 tranny out of a 78 chevy truck would it work in a 95 blazer?
Logged
1980 1/2 ton shortbed project...
1978 pontiac grand prix...

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Re: transmission
« Reply #1 on: February 17, 2010, 09:00:58 pm »
No, 95 would have a 4L60. They are controlled by the ECM.
Logged
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs

Offline hotrod24

  • Senior Member
  • ****
  • Posts: 1696
Re: transmission
« Reply #2 on: February 17, 2010, 09:29:23 pm »
thanks blazin
Logged
1980 1/2 ton shortbed project...
1978 pontiac grand prix...

Offline flaminchiten

  • Newbie
  • Posts: 12
Re: transmission
« Reply #3 on: February 17, 2010, 10:23:20 pm »
Anything will work with enough time and money...would it be worth it....no
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: transmission
« Reply #4 on: February 19, 2010, 12:15:45 pm »
why would the ecm have to be plugged in if the 350t has no ecm to plug into? i can understand putting the 4l60e into a 79 you need the ecm but the other way why would you need it?
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Re: transmission
« Reply #5 on: February 19, 2010, 03:11:17 pm »
It will through a code.
Logged
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19181
Re: transmission
« Reply #6 on: February 19, 2010, 03:41:23 pm »
Assuming you are talking about a T10 Blazer, in 1995 it used a 4L60E. A TH350 4wd trans will not be a direct swap. You could make it work if you really wanted to.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠¯¯¯¯¯'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10
Pages: [1]   Go Up
« previous next »