« previous next »
Pages: [1]   Go Down

Author Topic: 85 Blazer electrical haywire  (Read 3464 times)

Offline dwill223

  • New Users
  • Posts: 2
85 Blazer electrical haywire
« on: June 21, 2007, 10:38:15 pm »
I have a 85 K-5 Blazer and the other night i pulled out of the parking lot and when i hit the gas the headlights, taillights, dashlights and lighter went out. The alternator was pushing around 14 amps before this happened now it pushes 12. I have checked every ground I can find and did the best i could at the wiring but it seems to be something wrong in the fuse block. I pulled the block apart to check the wires and when i put it back together i didn't start. pulled apart again and it started when put together. I have even checked the wires themselves looking for melting point or something.  Am I missing something or is it time for a $530.00 painless pill. Any help would be greatly appreciated! :-\
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19211
Re: 85 Blazer electrical haywire
« Reply #1 on: June 22, 2007, 05:16:29 am »
Well I would check how you put back together the fuse block and make sure it went together 100%

Check your fusible links at the junction block on the firewall and down near the starter
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline dwill223

  • New Users
  • Posts: 2
Re: 85 Blazer electrical haywire
« Reply #2 on: June 22, 2007, 12:09:29 pm »
Thanks, I'll check those and see if that helps. ;D
Logged
Pages: [1]   Go Up
« previous next »