Author Topic: another a/c question (Read 5995 times)

maximus5541 · « **on:** August 08, 2008, 03:06:56 pm »

the a/c in my 83 works. it blows cold, but the problem is it just doesnt blow very hard . i was wondering if there was somethingthat i could clean or replace to fix this problem. i had a friend suggest that i clean the evaporator, but i thought i would ask here before i try anything. also as a side question, when i do trun on the a/c it drags the rpms down very very low?

maximus5541 · « **Reply #1 on:** August 09, 2008, 12:41:08 pm »

TTT Does any one have a thought before i start.

VileZambonie · « **Reply #2 on:** August 09, 2008, 04:18:25 pm »

If the fan motor is running at proper speeds and there are no obstructions, kinked vents or disconnected vents then clean the evaporator.

maximus5541 · « **Reply #3 on:** August 10, 2008, 08:19:08 am »

thats where i am going to start. i will check the vents and then go to clean the evaporator. Thaks for the help

biodiesel84 · « **Reply #4 on:** August 10, 2008, 11:17:10 am »

also, there is a high idle control for the a/c that will kick up the rpms when you turn it on...you may need to replace that or make sure it's hooked up right...

Chuck.

maximus5541 · « **Reply #5 on:** August 10, 2008, 04:01:41 pm »

thats what i was thinkin but when i do turn on the a/c the rpms dont go they go down. where would i begin the seach for this high idle switch.

wrangler · « **Reply #6 on:** August 10, 2008, 05:32:20 pm »

it should be on the side of your carb.

News:

Author Topic: another a/c question (Read 5995 times)

maximus5541

another a/c question

maximus5541

Re: another a/c question

VileZambonie

Re: another a/c question

maximus5541

Re: another a/c question

biodiesel84

Re: another a/c question

maximus5541

Re: another a/c question

wrangler

Re: another a/c question