« previous next »
Pages: [1]   Go Down

Author Topic: Valve spring question  (Read 2068 times)

Offline thachevythang

  • Registered Users
  • *
  • Posts: 231
Valve spring question
« on: February 23, 2011, 01:55:25 am »
Surely a newbie question but trying to get all the right parts ordered for my build.

I have new heads that support a .520 lift. Valve springs and retainers included. As long as my cam selection does not exceed that amount of lift, I don't have to order new springs correct?
Logged
'85 SHORTBED

Offline Gusgus74

  • Newbie
  • Posts: 21
Re: Valve spring question
« Reply #1 on: February 23, 2011, 01:46:02 pm »
You need to multiply the cam lobe lift by your rocker ratio to determine the true lift at the spring. I would still mock up a solid lifter, pushrod and rocker and spin the motor one revolution to verify if the spring is binding.
Logged

Online VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19180
Re: Valve spring question
« Reply #2 on: February 23, 2011, 03:41:17 pm »
Valve springs need to meet the cam manufacturers specifications as well as be installed at the correct specifications.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10
Pages: [1]   Go Up
« previous next »