switching from a standard shift indicator to an overdrive indicator

[bigjayfromwa]

       Hopefully you can help me out...  I have a 76 chev 3/4ton 4x4 and i am looking at swapping out the th350 tranny for a th700r4 tranny to get the overdrive option.
My problem is i would like to keep the column shifter instead of going to a floor shifter.  Do you know of anybody that makes as shift indicator that i can use?  since i only have P R N D 2 1 on my dial?  or if there is any other chevy model i can buy to get the overdrive dial?? (without too much modification)

I really dont want to have to modify the interior like that, i would rather leave the stock appearance.

Thank you very much for any information you may have!!!

Jason

[Prong]

Swap the indicator (2 screws on the cluster and one on the column shift tube for the indicator wire) and you're good to go. New ones are about $35 IIRC.

[VileZambonie]

Any truck that came with a 700R4 will have one.

[oldwhity]

Junkyard time!

[Captkaos]

Jason,
I sent you an email on this, did you get it or did you post here first?

[bigjayfromwa]

Thanks for the info.... I posted on her first before i got your email...

thank you though

[joesgarage71]

 There is a shift plate inside the column you need to modify too.