« previous next »
Pages: [1] 2   Go Down

Author Topic: At the track  (Read 12455 times)

Offline mike_hd1340

  • Newbie
  • Posts: 18
At the track
« on: May 22, 2009, 01:44:38 am »
Finally got my truck to the track.  It ran 7.16 @ 97mph in the 1/8th. (All motor no nitrous) Was having trouble getting it to hook but were working on it.  Hoping with a little more fine tuning and get the cal-tracs setup that she'll be in the high 6s. 


Logged

Offline choptop

  • Senior Member
  • ****
  • Posts: 2476
  • Extended cab fanatic
    • conversiontrucks
Re: At the track
« Reply #1 on: May 22, 2009, 07:42:52 am »
Awesome!!! Man that truck is sharp :o
Logged
76 C10 Choptop,76 C10 Swb
85 C10, 85 K10, 85 K20,86 C10,86 K10 (all extended cabs)
86 C30 extended crewcab

Offline HAULIN IT

  • Senior Member
  • ****
  • Posts: 1542
Re: At the track
« Reply #2 on: May 22, 2009, 07:52:59 am »
Yea! That's movin'
Logged

Offline campcrf

  • Registered Users
  • *
  • Posts: 235
  • stroked
Re: At the track
« Reply #3 on: May 22, 2009, 01:17:39 pm »
cool... good time... what would it do in the 1/4?
Logged
-smile-... Just because its contageous

Offline mike_hd1340

  • Newbie
  • Posts: 18
Re: At the track
« Reply #4 on: May 22, 2009, 01:30:27 pm »
I don't know kinda figure she would be in the mid to low 10s.  I'm really not geared for a 1/4 turning 4500 in 3rd at the finish line in the 1/8th. 
Logged

Offline BigHemi353

  • Registered Users
  • *
  • Posts: 235
  • Diesel Enthusiast
Re: At the track
« Reply #5 on: May 23, 2009, 04:33:40 pm »
Very clean! I love the color choices too.
Logged
-1986 Silverado K-20 6bt Cummins / NV4500/ np205- under construction

Offline eventhorizon66

  • Senior Member
  • ****
  • Posts: 1909
Re: At the track
« Reply #6 on: May 23, 2009, 06:59:17 pm »
SLEEPER!
Logged
'85 C10 SWB 350 700R4 TKO600

Offline SUX2BU99

  • Senior Member
  • ****
  • Posts: 1478
    • My Cardomain Site. Truck is on Page 6.
Re: At the track
« Reply #7 on: May 25, 2009, 04:12:44 pm »
Man no kidding, total sleeper! Love it! I think the conversion ratio for 1/8 to 1/4 is 1.57. That would make your 7.16 at 11.24!! Holy crap! What are you running in that thing???
Logged
85 Chevy Silverado C10 short, wide, yellow, 2wd. Lowered, 60-over 350 with Dart Iron Eagle heads and Comp Cams XE268 cam, TH350 w/ shift kit, 3.40 Gov-lok 12 bolt.

Offline SUX2BU99

  • Senior Member
  • ****
  • Posts: 1478
    • My Cardomain Site. Truck is on Page 6.
Re: At the track
« Reply #8 on: May 25, 2009, 04:14:08 pm »
Answered my own question:

010 casting 4 bolt block  12.5:1 compression  388cui
4340 eagle lightweight crank
4340 eagle 6" H-Beam rods
Splayed Main caps with arp studs
Mauhle forged pistons with file fit rings
Clevite 77 bearings
Comp XR294 hyd roller duration @.50 is 241-248 with a 542-561 lift
Dart pro 1 heads 200cc ported with 2.05 1.60s arp studs
Crane 1.5 rockers,  comp 4340 push rods,  comp retro fit lifters
Dart Kool Kan intake  750 holley dp
MSD pro billet with a 6al box
fuel cell with 2 holley black fuel pumps
truck weighs right at 4000 with me in it.
Have not had it to the track yet just got finished with it this winter  anybody have any ideas what she will run? 
All we race around here is 1/8th mile
150 shot of nitrous
3500 stall,  very well built 350 turbo,  12 bolt rear with 4:56s eaton posi, with caltrac bars and springs, and 29x13.5 ET Streets.

So almost 600 HP eh? Crazy!
Logged
85 Chevy Silverado C10 short, wide, yellow, 2wd. Lowered, 60-over 350 with Dart Iron Eagle heads and Comp Cams XE268 cam, TH350 w/ shift kit, 3.40 Gov-lok 12 bolt.

Offline mike_hd1340

  • Newbie
  • Posts: 18
Re: At the track
« Reply #9 on: May 25, 2009, 05:21:02 pm »
Quote from: SUX2BU99 on May 25, 2009, 04:12:44 pm
Man no kidding, total sleeper! Love it! I think the conversion ratio for 1/8 to 1/4 is 1.57. That would make your 7.16 at 11.24!! Holy crap! What are you running in that thing???

Yea thats about what I figure she will do on motor.  Think I can spray it to mid or low 10,  if I can ever get the traction issues worked out.
Logged

Offline mike_hd1340

  • Newbie
  • Posts: 18
Re: At the track
« Reply #10 on: May 25, 2009, 05:36:43 pm »
Couple pictures from this weekends racing,  This is what too much torque will do for you. lol


 
Logged

Offline eventhorizon66

  • Senior Member
  • ****
  • Posts: 1909
Re: At the track
« Reply #11 on: May 25, 2009, 05:46:54 pm »
A little duct tape and she'll be good as new. :P

Did this happen with the help of some spray?
Logged
'85 C10 SWB 350 700R4 TKO600

Offline mike_hd1340

  • Newbie
  • Posts: 18
Re: At the track
« Reply #12 on: May 25, 2009, 05:52:55 pm »
No believe it or not I still have'nt sprayed it.  This was the result of 12psi in the slicks and 2 full rounds on the cal-tracs launching at 4500.  It did hop the left front tire about 8 or 10 inches off the ground before it broke.  But on the good side I think I finally found the right combination to make it hook.  Got a new J.W. Racing ultra case transmission on the way should be here end of the week and will try it again. 
« Last Edit: May 25, 2009, 05:55:54 pm by mike_hd1340 »
Logged

Offline campcrf

  • Registered Users
  • *
  • Posts: 235
  • stroked
Re: At the track
« Reply #13 on: May 25, 2009, 10:40:45 pm »
wow... what torque......
  that is an awsome combo.
Logged
-smile-... Just because its contageous

Offline HAULIN IT

  • Senior Member
  • ****
  • Posts: 1542
Re: At the track
« Reply #14 on: May 26, 2009, 04:28:49 pm »
Mike, What were you getting for 60' times prior to your little transmission mis-hap?
Logged
Pages: [1] 2   Go Up
« previous next »