egr installation

[rustys82]

ok. i have 82 c10 swb. has a 350 crate. edelbrock manifond and holley carb. question is, where do the hoses hook up to on the carb and/or manifold from the egr. also where does the hose from the vapor can hook up to on the carb or manifold? please help me.

[82gmc3/4ton]

do you live in a area with visual under hood inspections?

[rustys82]

yeah. they do do a visual. thats all im concerned about. i have own the truck since 2004 and i have only put under 5000 miles on it.

[VileZambonie]

You will have a thermostatic vacuum switchin valve connected to ported vacuum. The other port will go to the egr valve. Do you have the vacuum hose routing diagram on the veci label?

[rustys82]

my veci label is hard to read. i tried to find a new, but still no luck. i just went a picked up my shop manual at my dads house. im going to check in there. also just got the new summit catalog in the mail so i got look through it and dream a little. vile you said before on my other post that i could get a new veci label from a resto shop. what do you mean. i tried to google it but came up with nothing. do you have any links.

[VileZambonie]

Can you read the part number on your old one?

[VileZambonie]

http://www.parts123.com/parts123/yb.dll?parta~dyndetail~Z5Z5Z50000050g~Z5Z5Z5AAXFT~P10.75~~~~~~~F

[rustys82]

from what i am able to make out is. the vapor can has 5 hose on it, i have 1. pcv supposed to have 2 ports, mine 1. distributor suppose to be vac advance, me no. im trying to find pictures of what all of these parts are. ie dist delay valve, egr/purge control valve tvs, purge signal hose, check valve, efe. oh and there is black round thing mounted above the ac/heater box on passanger side of the firewall. i think i might be screwed here.

[rustys82]

i would post pics but the last time i tried it didnt work. i tried to post 2 pics with a post in readers rides but my post never came up.

[VileZambonie]

Host your images on photobucket and then just use the image code with the link inside it like this:

[ img ] http:// your link here . jpg example [ / img ]


no spaces

[rustys82]

well i figure out some of my mess. i looked at every page of my shop manual. remember im new at this. the one thing i was concerned about turn out to be the vacuum can for the a/c. the other was the vac switch for the ESC with isnt used anymore. and the other turned out to be the vac switch for, you guessed it, cruise control. but i still have to figure out the plumbing for the fuel vap can and the egr. and all the other stuff. oh yeah, i figured out the pics thing. check out my truck at members rides.

[rustys82]

ok here is the label

[rustys82]

the only things i have are the egr, vapor can with ONLY the fuel tank hose and the efe.  there is a pcv but not the right one

[rustys82]

engine pics