« previous next »
Pages: [1]   Go Down

Author Topic: Seats and console finished UPDATED WITH NEW PICS  (Read 11455 times)

Offline Maintenanceman

  • Registered Users
  • *
  • Posts: 197
  • Older is always better
Seats and console finished UPDATED WITH NEW PICS
« on: February 06, 2010, 07:45:22 pm »
So I finally got the new seats in and the console built. Over the last 2 weeks Ive put new bucket seats in out of a dodge intrepid (lol, I know but they matched and felt really nice) and built a custom center console with sub enclosure and put 2 inch lift springs in the front and 3 inch blocks in the rear.

The console is built out of 3/4 MDF. Its home to a 12" Kicker CVT. That eliminates any reason for a sub box at all behind the seat and for a guy that 6'2-260, THATS NICE. Then I took the top peice to the local upholstery shop and had it wrapped in vinyl and foam. Then I bought 2 cup holder inserts on ebay for 3 bucks a peice and cut the cup holder holes in the console and had a peice of stainless at work cut out to go around the cup holders with the chevy emblem punched out as well. With the black carpet behind it it reall stands out. Ill get some more pics here in a hour or so.


By the way, Im no photographer....thats my wifes job usually.











« Last Edit: February 07, 2010, 02:19:47 pm by Maintenanceman »
Logged
1985 Silverado K20- 355 SBC Vortec heads and a lil' cam...

Offline choptop

  • Senior Member
  • ****
  • Posts: 2476
  • Extended cab fanatic
    • conversiontrucks
Re: Seats and console finished
« Reply #1 on: February 06, 2010, 07:56:51 pm »
that looks great. Very nice job
Logged
76 C10 Choptop,76 C10 Swb
85 C10, 85 K10, 85 K20,86 C10,86 K10 (all extended cabs)
86 C30 extended crewcab

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Seats and console finished
« Reply #2 on: February 06, 2010, 09:09:04 pm »
looks dang good
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline beastie_3

  • Senior Member
  • ****
  • Posts: 3170
  • Josh
    • My truck pics
Re: Seats and console finished
« Reply #3 on: February 07, 2010, 01:17:36 am »
Nice!
Logged

Offline Ricoh

  • Newbie
  • Posts: 15
Re: Seats and console finished
« Reply #4 on: February 07, 2010, 06:49:04 am »
What year are those Intrepid seats? How much modification did you have to do to get them to fit? Great job on the truck.

Rick
Logged
1980 Chev short box fleetside

Offline krafty33

  • Newbie
  • Posts: 61
Re: Seats and console finished
« Reply #5 on: February 07, 2010, 09:47:29 am »
That looks great. What wheels do you have on yout truck?I am looking for new ones
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19167
Re: Seats and console finished
« Reply #6 on: February 07, 2010, 11:23:04 am »
Let's see some more pics... Tell us more about that console too. Great looking truck btw
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠¯¯¯¯¯'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Maintenanceman

  • Registered Users
  • *
  • Posts: 197
  • Older is always better
Re: Seats and console finished
« Reply #7 on: February 07, 2010, 12:49:35 pm »
the wheels are eagle alloys. Its sunny out so Im going to get more pics today I promise as far as the year model Im not real sure yet Ill have to get back with the guy I got them from. They really werent that bad to fit in I just had to make my own brackets But with a plasma cutter and some thick sheetmetal and a press brake that pas pretty simple ( I work in a sheetmetal facilty) and the best part about the drivers seat is....Its powered.

As for the console Its built out of 3/4 MDF. Its home to a 12" Kicker CVT. That eliminates any reason for a sub box at all behind the seat and for a guy that 6'2-260, THATS NICE. Then I took the top peice to the local upholstery shop and had it wrapped in vinyl and foam. Then I bought 2 cup holder inserts on ebay for 3 bucks a peice and cut the cup holder holes in the console and had a peice of stainless at work cut out to go around the cup holders with the chevy emblem punched out as well. With the black carpet behind it it reall stands out. Ill get some more pics here in a hour or so.
« Last Edit: February 07, 2010, 12:56:24 pm by Maintenanceman »
Logged
1985 Silverado K20- 355 SBC Vortec heads and a lil' cam...

Offline Maintenanceman

  • Registered Users
  • *
  • Posts: 197
  • Older is always better
Re: Seats and console finished UPDATED WITH NEW PICS
« Reply #8 on: February 07, 2010, 11:21:31 pm »
updated with new pics
Logged
1985 Silverado K20- 355 SBC Vortec heads and a lil' cam...

Offline jaredts

  • Senior Member
  • ****
  • Posts: 1330
Re: Seats and console finished UPDATED WITH NEW PICS
« Reply #9 on: February 08, 2010, 05:48:46 am »
That stainless piece with the chevy emblem is a really nice touch.  Good job all around.  I'm in Simpsonville, KY btw.  Work in Louisville.  I also work with cnc equipment (among other things).  I'm an engineer at a forge shop.
Logged

Offline 78 Chevyrado

  • Z62 ON-ROAD
  • Site Supporters
  • Senior Member
  • ******
  • Posts: 2748
    • My Photobucket Site
Re: Seats and console finished UPDATED WITH NEW PICS
« Reply #10 on: February 08, 2010, 09:51:53 am »
Looks good  it looks like it's supposed to be there!   nice work!
Logged
Kenny

1978 C-20, 350/400, 3.73, Graystone Metallic, Raceline Renegade 8 Wheels - 18x8.5, 275/70R18 BFG KO's

Offline SUX2BU99

  • Senior Member
  • ****
  • Posts: 1478
    • My Cardomain Site. Truck is on Page 6.
Re: Seats and console finished UPDATED WITH NEW PICS
« Reply #11 on: February 08, 2010, 12:13:03 pm »
Lookin' good.  Hey you CNC guys, can you take an AutoCAD file and cut something fairly small out of some ABS? :)
Logged
85 Chevy Silverado C10 short, wide, yellow, 2wd. Lowered, 60-over 350 with Dart Iron Eagle heads and Comp Cams XE268 cam, TH350 w/ shift kit, 3.40 Gov-lok 12 bolt.

Offline Maintenanceman

  • Registered Users
  • *
  • Posts: 197
  • Older is always better
Re: Seats and console finished UPDATED WITH NEW PICS
« Reply #12 on: February 09, 2010, 01:12:28 am »
I probably dont have the equipment for what your wanting. All I have is CNC Press brakes and turret punches. But maybe theres somebody else that can help you
Logged
1985 Silverado K20- 355 SBC Vortec heads and a lil' cam...

Offline jaredts

  • Senior Member
  • ****
  • Posts: 1330
Re: Seats and console finished UPDATED WITH NEW PICS
« Reply #13 on: February 09, 2010, 05:54:44 am »
Sorry man.  We have the equipment at work, but I don't think I could get away with using them for personal use.
Logged

Offline SUX2BU99

  • Senior Member
  • ****
  • Posts: 1478
    • My Cardomain Site. Truck is on Page 6.
Re: Seats and console finished UPDATED WITH NEW PICS
« Reply #14 on: February 09, 2010, 10:48:59 am »
No worries, just thought I'd ask :)
Logged
85 Chevy Silverado C10 short, wide, yellow, 2wd. Lowered, 60-over 350 with Dart Iron Eagle heads and Comp Cams XE268 cam, TH350 w/ shift kit, 3.40 Gov-lok 12 bolt.
Pages: [1]   Go Up
« previous next »