Flip kit ?

[Lucky73]

So I here more and more about the flip kit.I just want to know much it actually drops it,and do you have to notch the frame? 

[biscuit41]

It will lower the rear of your truck the thickness of your axle+leaf pack.  I didn't have to use a c notch on mine but you may have to depending on the clearance...

[VileZambonie]

If your rear springs still have a good arch you can get away without the C-notch.

[three8six]

I cut the factory bumpstop and bracket off, and bought a bumpstop that was like 3/4 of an inch and put it directly on the frame just in case it does hit.....

[biscuit41]

I cut the factory bumpstop and bracket off, and bought a bumpstop that was like 3/4 of an inch and put it directly on the frame just in case it does hit.....

My flip kit came with one.  I'm sure they are only a couple of bucks...

[Captkaos]

Expect about 5-7" of drop with a flip.

[Lucky73]

Thanks I may consider doing this

[Flamingbig10]

When I had 3 leafs the flip lowered it almost 8" and when I added 2 leafs back it raised the rear up 3", I used a beltec flip kit with c-notch