« previous next »
Pages: [1]   Go Down

Author Topic: Floor pans?  (Read 3466 times)

Offline SeanD

  • New Users
  • Posts: 2
Floor pans?
« on: March 15, 2010, 06:51:43 am »
Has anyone ever done a write-up on replacing the cab corners, floorpans and rockers?  In most guys' builds it goes from before to after, but I'm interested in what and where things get welded together. 
I just got an 80 step, and its got issues with all that plus the firewall.

Thanks!
Logged

Offline Jesse Walter

  • Newbie
  • Posts: 45
Re: Floor pans?
« Reply #1 on: March 15, 2010, 08:41:57 am »
Just do a search here.  There are plenty of threads with lots of pictures of floor, rocker and cab corner repairs. 
Logged
Jesse Walter
86 K20 4x4
86 C30 Dump

Online VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19169
Re: Floor pans?
« Reply #2 on: March 15, 2010, 12:50:57 pm »
Agreed, just remember to mock everything up with the door aligned in place and the door seal installed. Make sure all of your panel gaps are correct before you weld or bond any of the components in place. Most people tack, pin, or screw them in place first. Be careful if you're welding as not to overheat the metal and either distort it or burn through.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18454
    • http://www.73-87chevytrucks.com
Re: Floor pans?
« Reply #3 on: March 15, 2010, 04:03:33 pm »
the 5 piece repair kit in the catalog has a direct link to a members install.

http://forum.73-87chevytrucks.com/smforum/index.php?topic=5661.0
Logged

Offline liftedchevys87

  • Newbie
  • Posts: 33
Re: Floor pans?
« Reply #4 on: March 31, 2010, 08:30:06 pm »
Do you still need help with this?
Logged
- 87 1/2 ton 350 4x4
- 78 1/2 ton 454 flat bed 2wd
Pages: [1]   Go Up
« previous next »