« previous next »
Pages: [1] 2   Go Down

Author Topic: Cleaning Diff Have questions  (Read 9592 times)

Offline Da67goatman

  • Site Supporters
  • Junior Member
  • ******
  • Posts: 758
  • Burban
Cleaning Diff Have questions
« on: October 19, 2010, 01:10:29 pm »
I am cleaning up my 14 bolt FF and changing the fluid since its never been done.  I drained the fluid but everything is coated in sludge, how should I clean this off?  Kerosene?  Also How much fluid need to go back in, I bought a Gallon just in case.  Thanks.
Logged
<Pitcrew>
1989 R2500 Suburban mild 350 TBI 700r4 10.5" 14bolt 4.10 w/ 33s
1992 fullsize Blazer 4x4  35s no lift, 4.10s, Hella driving lights, TJ Flares, Huge bumpers, Snorkel, custom interior

Offline three8six

  • Frequent Member
  • **
  • Posts: 486
Re: Cleaning Diff Have questions
« Reply #1 on: October 19, 2010, 01:38:24 pm »
Question 1. I used break cleaner not saying its the right way though....
Question 2. I always fill them up til it comes out of the hole.....
Logged

Offline Grim 82

  • Senior Member
  • ****
  • Posts: 1651
Re: Cleaning Diff Have questions
« Reply #2 on: October 19, 2010, 02:07:11 pm »
Quote from: three8six on October 19, 2010, 01:38:24 pm
Question 1. I used break cleaner not saying its the right way though....
Question 2. I always fill them up til it comes out of the hole.....

Me too on both counts.
Logged
Give a man a gun, and he might rob a bank. Give a man a bank, and he might rob the world.

Offline Da67goatman

  • Site Supporters
  • Junior Member
  • ******
  • Posts: 758
  • Burban
Re: Cleaning Diff Have questions
« Reply #3 on: October 19, 2010, 04:52:52 pm »
Can I get a second opinion on what this is?  My father and I seem to agree that it is a cone type mechanical locker, Just that neither of us have ever seen one.
Logged
<Pitcrew>
1989 R2500 Suburban mild 350 TBI 700r4 10.5" 14bolt 4.10 w/ 33s
1992 fullsize Blazer 4x4  35s no lift, 4.10s, Hella driving lights, TJ Flares, Huge bumpers, Snorkel, custom interior

Offline Da67goatman

  • Site Supporters
  • Junior Member
  • ******
  • Posts: 758
  • Burban
Re: Cleaning Diff Have questions
« Reply #4 on: October 20, 2010, 06:06:32 pm »
My neighbor ( ex-jeep racer) seems to think its a detroit locker.  I need help, we just don't have enough experience to clearly id it.
Logged
<Pitcrew>
1989 R2500 Suburban mild 350 TBI 700r4 10.5" 14bolt 4.10 w/ 33s
1992 fullsize Blazer 4x4  35s no lift, 4.10s, Hella driving lights, TJ Flares, Huge bumpers, Snorkel, custom interior

Online zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: Cleaning Diff Have questions
« Reply #5 on: October 20, 2010, 06:57:53 pm »
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=380277485566&viewitem=&sspagename=STRK%3AMEWAX%3AIT

Looks like a Gov-Loc to me.  Do you have an options list in your glove box?  G-80 is the RPO code...
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline Da67goatman

  • Site Supporters
  • Junior Member
  • ******
  • Posts: 758
  • Burban
Re: Cleaning Diff Have questions
« Reply #6 on: October 22, 2010, 01:24:07 pm »
How do I get the carrier out?  Pulled axle shafts already, removed main caps, but it only comes out like 1/4in at best.  Do I have to pull the pinion, i really don't want too unless I have to.
Logged
<Pitcrew>
1989 R2500 Suburban mild 350 TBI 700r4 10.5" 14bolt 4.10 w/ 33s
1992 fullsize Blazer 4x4  35s no lift, 4.10s, Hella driving lights, TJ Flares, Huge bumpers, Snorkel, custom interior

Offline Da67goatman

  • Site Supporters
  • Junior Member
  • ******
  • Posts: 758
  • Burban
Re: Cleaning Diff Have questions
« Reply #7 on: October 22, 2010, 02:18:00 pm »
Never mind I got it, didn't know about the adjusters, lossened them and it popped right out.
Logged
<Pitcrew>
1989 R2500 Suburban mild 350 TBI 700r4 10.5" 14bolt 4.10 w/ 33s
1992 fullsize Blazer 4x4  35s no lift, 4.10s, Hella driving lights, TJ Flares, Huge bumpers, Snorkel, custom interior

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18454
    • http://www.73-87chevytrucks.com
Re: Cleaning Diff Have questions
« Reply #8 on: October 23, 2010, 10:41:12 am »
Factory Eaton Locker.
Logged

Offline Da67goatman

  • Site Supporters
  • Junior Member
  • ******
  • Posts: 758
  • Burban
Re: Cleaning Diff Have questions
« Reply #9 on: October 23, 2010, 03:18:18 pm »
I heard somewhere that they are rebuildable, with better components.  Is this true? and where would I get a rebuild kit?
Logged
<Pitcrew>
1989 R2500 Suburban mild 350 TBI 700r4 10.5" 14bolt 4.10 w/ 33s
1992 fullsize Blazer 4x4  35s no lift, 4.10s, Hella driving lights, TJ Flares, Huge bumpers, Snorkel, custom interior

Offline The dream

  • Registered Users
  • *
  • Posts: 147
Re: Cleaning Diff Have questions
« Reply #10 on: October 23, 2010, 08:12:19 pm »
Newbie questions!  ???
So a Gov-Loc is a Factory eaton?
What can i expect from a setup like this? why would you have to build it up to make it better?
Logged
Never give up.

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19171
Re: Cleaning Diff Have questions
« Reply #11 on: October 23, 2010, 08:56:15 pm »
Quote from: Da67goatman on October 22, 2010, 02:18:00 pm
Never mind I got it, didn't know about the adjusters, lossened them and it popped right out.

Make sure you set the preload and backlash when you put it back in.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Da67goatman

  • Site Supporters
  • Junior Member
  • ******
  • Posts: 758
  • Burban
Re: Cleaning Diff Have questions
« Reply #12 on: October 23, 2010, 10:25:42 pm »
Yessir will be resetting everything cause i'm changing ratios, upgrading to a 3.42.  Should I change the bearings too or not?  They are not very worn, just very lightly from normal use, it is a low mileage rear.  Planing to do a rear disk swap in the future, wanted to do it then if I can.
Logged
<Pitcrew>
1989 R2500 Suburban mild 350 TBI 700r4 10.5" 14bolt 4.10 w/ 33s
1992 fullsize Blazer 4x4  35s no lift, 4.10s, Hella driving lights, TJ Flares, Huge bumpers, Snorkel, custom interior

Offline The dream

  • Registered Users
  • *
  • Posts: 147
Re: Cleaning Diff Have questions
« Reply #13 on: October 24, 2010, 02:49:21 pm »
 ??? am i wrong about this factory eaton? any help ??
Logged
Never give up.

Offline Da67goatman

  • Site Supporters
  • Junior Member
  • ******
  • Posts: 758
  • Burban
Re: Cleaning Diff Have questions
« Reply #14 on: October 24, 2010, 03:48:36 pm »
Eaton makes gov-lok thats the factory posi or limited slip.  I heard you could change the clutch material and get more positive engagement sooner, but I'm not sure where to get the stuff.
Logged
<Pitcrew>
1989 R2500 Suburban mild 350 TBI 700r4 10.5" 14bolt 4.10 w/ 33s
1992 fullsize Blazer 4x4  35s no lift, 4.10s, Hella driving lights, TJ Flares, Huge bumpers, Snorkel, custom interior
Pages: [1] 2   Go Up
« previous next »