« previous next »
Pages: [1] 2   Go Down

Author Topic: "ZBart"  (Read 15026 times)

Offline KY..Rob

  • Registered Users
  • *
  • Posts: 185
"ZBart"
« on: November 30, 2010, 07:31:18 pm »
I ran across an 86 K10 shortbed the other day (Very nice truck) I happen to notice that all along the inside of the door jams and Rockers, these tiny plastic plugs..On the center of them they just said "Zbart" The owner said that was a factory option to have the Truck "Zbarted" It's the first one I have seen.

Any one else heard of "Zbarting"

Rob..
Logged

Offline low budget

  • Registered Users
  • *
  • Posts: 222
Re: "ZBart"
« Reply #1 on: November 30, 2010, 07:53:31 pm »
Zebart was a company that had shops about every where. You could take you car/truck to them and they would drill tiny holes in the doors and other select areas, and fill it with a rust proofing substance.  It was pretty expensive from what I remember, but worked pretty good.     
Logged
86 Chevy LWB 305 scrapped for 350, 3/5 drop

Offline KY..Rob

  • Registered Users
  • *
  • Posts: 185
Re: "ZBart"
« Reply #2 on: November 30, 2010, 08:02:49 pm »
I wonder if any of these companys still exist today? I agree on it working very well, The Truck was cherry! Minus a little surface rust in the Bed.
Logged

Offline Cody1018

  • Registered Users
  • *
  • Posts: 144
Re: "ZBart"
« Reply #3 on: November 30, 2010, 08:04:44 pm »
Logged
1986 Chevy K10 Silverado

Offline KY..Rob

  • Registered Users
  • *
  • Posts: 185
Re: "ZBart"
« Reply #4 on: November 30, 2010, 08:38:36 pm »
Cody, Thanks for the link. Looks like the nearest one to me is in Dayton Ohio. These Guy's do a little bit of everything.

Learn something new everyday.

Rob..
Logged

Offline Cody1018

  • Registered Users
  • *
  • Posts: 144
Re: "ZBart"
« Reply #5 on: November 30, 2010, 08:54:57 pm »
No problem, I was curious as well and decided to google it. Ya, i defiantly learn something new everyday on here.
Logged
1986 Chevy K10 Silverado

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: "ZBart"
« Reply #6 on: November 30, 2010, 09:23:05 pm »
My boss and good friend had his car done with Rusty Jones, basically the same thing, and didn't hold up...
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19167
Re: "ZBart"
« Reply #7 on: November 30, 2010, 09:25:48 pm »
My 1980 C10 had it. All it is was undercoating.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline KY..Rob

  • Registered Users
  • *
  • Posts: 185
Re: "ZBart"
« Reply #8 on: November 30, 2010, 09:42:22 pm »
Vile, How did the 80 C10 hold up? I just ordered Left and Right side 5pc kits from Chris, I was thinking of some kind of Rust proofing on the insides of all the parts. But I wonder how they would hold up when I start welding.
Logged

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Re: "ZBart"
« Reply #9 on: November 30, 2010, 09:50:24 pm »
I have had several trucks over the years that have been Z barted, a few others that were done with other brands. They were all in better than average shape as far as rust goes.
Logged
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs

Offline Layne

  • Senior Member
  • ****
  • Posts: 1023
Re: "ZBart"
« Reply #10 on: December 01, 2010, 01:01:13 am »
My dad had an 83 celica he bought brand new and had it done. It was the only early 80's toyota I saw with hardly any rust. Once it hit 400,000 miles, it kinda fell apart though.
Logged
77 c-10 - 77 400 86 700r4 "Emmy"
83 citation - 2.5L Four on the Floor!
88 sierra - reman 350 700r4 "Eleanor"
All normal practicality and rational money handling goes out of the window when it comes to my truck.

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19167
Re: "ZBart"
« Reply #11 on: December 01, 2010, 11:07:46 am »
It held up pretty good except for where the rust was lol

I highly recommend that stuff I used on my 74
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline bobcooter

  • Junior Member
  • ***
  • Posts: 788
  • 1979 Scottsdale C-20
Re: "ZBart"
« Reply #12 on: December 01, 2010, 11:41:07 am »
Quote from: zieg85 on November 30, 2010, 09:23:05 pm
My boss and good friend had his car done with Rusty Jones, basically the same thing, and didn't hold up...
I don't think I'd spray my truck with anything called Rusty ::) I bought an 83 Scottsdale at Banner Chrevrolet in New Orleans and they offered the Z-Bart. I had it done. Got rid of it long before it ever rusted but I remeber the smell was pretty strong. Especially on hot days. Whew! Stout! Smelled like hot tar. Not too sexy.
Logged
'79 C-20, 350/400, 3:73 gears, 9 leafs and a headache rack
Favorite Quote, "Good judgement comes from experience. Experience comes from poor judgement."

Offline Novadiecast

  • Registered Users
  • *
  • Posts: 145
Re: "ZBart"
« Reply #13 on: December 01, 2010, 10:42:42 pm »
As I remember Z-bart had a lifetime guarranty but only if you took it back to them every year for an anual inspection.
Logged
1985 Crew Cab dually project soon to be SRW Short Bed

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19167
Re: "ZBart"
« Reply #14 on: December 02, 2010, 01:58:08 pm »
Those scams are what put rusty jones out of business.

http://en.wikipedia.org/wiki/Rusty_Jones
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10
Pages: [1] 2   Go Up
« previous next »