« previous next »
Pages: [1] 2   Go Down

Author Topic: 3/4 ton to 1 ton project  (Read 17082 times)

Offline spectreblazer

  • Newbie
  • Posts: 53
3/4 ton to 1 ton project
« on: January 01, 2011, 11:38:51 am »
Well this is my first post here. i purchased some parts for my 82 blazer project and was really impressed with the customer service, the metal and the quality so i thought i would show you guys my other project i'm working on

i bought this 84 intending to use the motor and parts to build my 82 but after deciding to make a good work truck out of the 84 and have the ability to pull my blazer around and tow stuff i decided to go this route.



i know she is pretty rusty  ;D

tore off the old bed cause it was JUNK







the frame is solid just needs to be cleaned up






here is a comparison of how bad rust can get






picked up a turbo kit for the 6.2L pretty cheap



started tearing the 6.2L apart to build it some for boost





then i got a good deal on an 89 c30 that caught on fire. has everything i need to finish mine off



the truck came from down south and rust free for the most part















then we stripped both frames down



the plan is to take this axle



and throw it under the 3/4 ton

which means i have to remove this





next i have to remove the dually axle and cut all the rivets out and take the leaf spring hangars and use the one from the dually for the 3/4 since the two are different

what do you guys think? any advice on the dually swap or in general?

thanks
Logged

Offline acefoxx

  • Registered Users
  • *
  • Posts: 136
  • 84 SierraClassic stepside/85 K5 Blazer
    • Acefoxx.com
Re: 3/4 ton to 1 ton project
« Reply #1 on: January 01, 2011, 12:15:10 pm »
This is great stuff. I am very interested in the 6.2 turbo project as my GMC stepside originally had a 6.2. Keep the pics coming.
Logged
'84 GMC SierraClassic/'85 K5 Blazer Silverado
http://acefoxx.com

Offline Shaz

  • Newbie
  • Posts: 9
Re: 3/4 ton to 1 ton project
« Reply #2 on: January 01, 2011, 12:43:07 pm »
Welcome from Virginia!

fantastic truck, keep us up to date.  Out of curiosity were did you get your turbo kit?  I want to turbo my new truck, but its a 3 speed so it wouldn't be worth it.  Still though can you give us more info on your turbo kit?
Logged

Offline spectreblazer

  • Newbie
  • Posts: 53
Re: 3/4 ton to 1 ton project
« Reply #3 on: January 01, 2011, 02:19:17 pm »
Quote from: Shaz on January 01, 2011, 12:43:07 pm
Welcome from Virginia!

fantastic truck, keep us up to date.  Out of curiosity were did you get your turbo kit?  I want to turbo my new truck, but its a 3 speed so it wouldn't be worth it.  Still though can you give us more info on your turbo kit?

off of craigslist. it has banks manifolds but a rotomaster turbo. a 6.5L turbo setup would work too.

here is a pic of the blazer i plan to pull (the one on the right)

the other blazer on the left is my daily driver currently until i can get this truck done

« Last Edit: January 01, 2011, 03:03:44 pm by spectreblazer »
Logged

Offline spectreblazer

  • Newbie
  • Posts: 53
Re: 3/4 ton to 1 ton project
« Reply #4 on: January 02, 2011, 09:19:52 pm »
dually axle is out. also found out that my old 14 bolt in the 3/4 ton was a sf and the dually is a full floater so it's stronger. how much stronger is a ff compared to a sf?

start pulling spring hangars tomorrow after i get out of school. maybe even get an axle back in if we move fast enough.

do you guys know any good sites to buy polyurethane body mounts, leaf spring bushings, etc. kinda want to buy one big kit or if i could get a good price on just the body mounts.
Logged

Offline polish pete

  • Newbie
  • Posts: 24
Re: 3/4 ton to 1 ton project
« Reply #5 on: January 02, 2011, 11:39:22 pm »
a ff axle is much stronger compared to a sf axle, and look around they offer a ton of poly bushings.
« Last Edit: January 03, 2011, 10:00:51 am by Captkaos »
Logged

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: 3/4 ton to 1 ton project
« Reply #6 on: January 03, 2011, 07:20:40 am »
     Well it looks like you are moving right along.  You should have a solid tow truck when you are done.  Nice blazer also, keep us informed of your progress.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: 3/4 ton to 1 ton project
« Reply #7 on: January 03, 2011, 07:24:02 am »
     Sorry didn't answer your question, a lot of people suggest p-s-t on here to get bushings.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline Engineer

  • Senior Member
  • ****
  • Posts: 1402
Re: 3/4 ton to 1 ton project
« Reply #8 on: January 03, 2011, 07:46:11 pm »
I approve.
Logged
2002 Chevy 2500HD 4x4 8.1/ZF6sp RC/LB
2001 Chevy 2500HD 4x4 6.0/4L85E EC/SB
1997 Chevy Blazer 4x4
1994 Chevy K-2500 4x4 C6P 5.7/4L80E
1979 Chevy K-30 4x4 4sp 4.10
1977 Chevy K-30 4x4 4sp 4.10 454

Dad of an Eagle Scout, and a Life Scout

Offline beastie_3

  • Senior Member
  • ****
  • Posts: 3170
  • Josh
    • My truck pics
Re: 3/4 ton to 1 ton project
« Reply #9 on: January 03, 2011, 09:05:08 pm »
Awesome build. Keep us updated!
Logged

Offline spectreblazer

  • Newbie
  • Posts: 53
Re: 3/4 ton to 1 ton project
« Reply #10 on: January 03, 2011, 09:29:38 pm »
thanks guys.

need to start a list of all the stuff i'm going to need soon. it's gonna hurt the wallet but i get excited when a bunch of parts show up.

removed the rest of the hangars today on both trucks. rivets are no match for a torch. tomorrow we start measuring and drilling and hopefully get the axle mocked up. i'll bring my camera and get some more pics too
Logged

Offline spectreblazer

  • Newbie
  • Posts: 53
Re: 3/4 ton to 1 ton project
« Reply #11 on: January 06, 2011, 10:07:37 pm »
got the dually mocked up under the 4wd frame. still have some drilling and bolting to do but  8 of the holes did line up.





have some friends that have been helping me out a ton too. wouldn't be as far as it is right now with out them.

hoping snow day tomorrow so we can work on it more
Logged

Offline spectreblazer

  • Newbie
  • Posts: 53
Re: 3/4 ton to 1 ton project
« Reply #12 on: January 12, 2011, 10:23:09 pm »
more pics been busy
























had some fun with the shocks








Logged

Offline bigandrich22

  • Newbie
  • Posts: 33
Re: 3/4 ton to 1 ton project
« Reply #13 on: January 21, 2011, 01:16:21 pm »
anymore updates
Logged

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: 3/4 ton to 1 ton project
« Reply #14 on: January 22, 2011, 08:04:20 pm »
     WOW, you went to town with that roller.   :o
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom
Pages: [1] 2   Go Up
« previous next »