« previous next »
Pages: [1]   Go Down

Author Topic: Frame brace/strengthening  (Read 9026 times)

Offline Elpresidente

  • Registered Users
  • *
  • Posts: 212
Frame brace/strengthening
« on: February 15, 2011, 10:15:22 am »
Ive got an '82 Chevy K10, and I was thinking that this year I may want to make the frame a bit more rigid.
Does anyone know of any methods to do so, by either welding or bolting-on supports at certain spots on the frame?
Thanks.
Logged
'82 Chev Scottsdale
Proud to be Canadian \m/

Offline Grim 82

  • Senior Member
  • ****
  • Posts: 1651
Re: Frame brace/strengthening
« Reply #1 on: February 15, 2011, 10:57:01 am »
The frame brace kit sold for the steering box area would be a good upgrade.
Logged
Give a man a gun, and he might rob a bank. Give a man a bank, and he might rob the world.

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19182
Re: Frame brace/strengthening
« Reply #2 on: February 15, 2011, 11:21:37 am »
There are many things you can do however some frame flex is good and prevents unnecessary stress... What are you trying to achieve?
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline thirsty

  • Senior Member
  • ****
  • Posts: 1289
    • Suitor's Garage
Re: Frame brace/strengthening
« Reply #3 on: February 15, 2011, 04:49:58 pm »
I agree with Vile, if it doesn't flex it will probably break easier. A bare frame with nothing on it is alot more flexible than you would think.
I would only brace it where they tend to crack where stuff is bolted on like the steering box.
Logged
Real trucks are built, not bought Build thread

Give me a long enough lever and a place to stand, and I shall move the earth or break this bolt...Whatever, just hold my beer!

Offline junkman.

  • Registered Users
  • *
  • Posts: 109
Re: Frame brace/strengthening
« Reply #4 on: February 21, 2011, 12:56:42 pm »
Well frame flex is good in the right places but when GM & dodge went from the sector shaft coming out the side of the box to the bottom now these frame are failing from flex in this area not good so if your frame has not cracked yet a strut style brace will be best if you frame it cracked  you could use a weld in plate type.   

On my LB frame the frame is broke almost all the way around the box on my SB frame its good I'm going to make two struts that mount off the box bolts   well good luck JM
Logged
Pages: [1]   Go Up
« previous next »