« previous next »
Pages: [1]   Go Down

Author Topic: masking tape  (Read 4263 times)

Offline Bitzer!

  • Junior Member
  • ***
  • Posts: 906
  • Smiles per gallon
masking tape
« on: March 05, 2011, 04:13:30 am »


Ok guys another one for ya!

When my truck was at the alleged body shop, they masked several parts (for no real reason!) Then they left it outside.

My question is how the heck can you get it off quickly? It's a nightmare!!

Cheers
Logged
1979 GMC CrewCab  C20 1t
454 750 Holley,TH350, 14bolt diff fully floating
Why aren't there 8 days in a week!
A K5 rolling shell *new addition*

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Re: masking tape
« Reply #1 on: March 05, 2011, 07:05:49 am »
GOOD LUCK with that! It depends on what its on, and the quality of the tape. I have used razor blades on chrome and stainless before but it can scratch if your not really carefull. lacquer thinner softens it sometimes too.
Logged
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: masking tape
« Reply #2 on: March 05, 2011, 09:35:52 am »
     GOOF OFF  ;D   Works like a charm, I used it too get duck tape and gorrilla tape residue off before.  With a little bit of elbow grease, it all comes right off without damaging the painted surface.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19192
Re: masking tape
« Reply #3 on: March 05, 2011, 11:18:22 am »
Use a heat gun carefully!
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Bonanza76

  • Newbie
  • Posts: 18
Re: masking tape
« Reply #4 on: March 07, 2011, 06:47:14 pm »
+ 1 on Goof Off or Goo Gone to remove any of the tape residue.  The Heat gun would work to get the tape off initially.
Logged

Offline beastie_3

  • Senior Member
  • ****
  • Posts: 3170
  • Josh
    • My truck pics
Re: masking tape
« Reply #5 on: March 07, 2011, 06:49:08 pm »
wd 40
Logged

Offline three8six

  • Frequent Member
  • **
  • Posts: 486
Re: masking tape
« Reply #6 on: March 07, 2011, 07:28:19 pm »
Theres a chemical called peerco that is a gelatinous substance that would work well. Also another chemical called citrasafe which is a liquid that would work well is 100% organic. What I would use though is a plastic scraper like the blue or red one here http://www.jusntyme.com/products/scrapers.html. Also what about a razor blade if you got some steady hands/good sight?
Logged

Offline 1980c10

  • Senior Member
  • ****
  • Posts: 1205
Re: masking tape
« Reply #7 on: March 07, 2011, 08:10:13 pm »
Quote from: Bonanza76 on March 07, 2011, 06:47:14 pm
+ 1 on Goof Off or Goo Gone to remove any of the tape residue.  The Heat gun would work to get the tape off initially.

I like goo gone after the heat gun as well. Be sure to follow up with a good car wash immediately after.
Logged
Pages: [1]   Go Up
« previous next »