« previous next »
Pages: [1]   Go Down

Author Topic: Help needed please  (Read 3424 times)

Offline onelow84

  • Registered Users
  • *
  • Posts: 113
Help needed please
« on: April 15, 2011, 08:41:26 am »
I have an 84 2wd shorty and was wondering what all I need to do to use a late 70's cab. I will be using a 90 suburban front clip too. I have found one in great shape for a cheap price and just want to know what i am up against. Should i hold out for a 81-87 cab? Thanks for any help!
Logged

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: Help needed please
« Reply #1 on: April 15, 2011, 09:38:42 am »
     I would get advice from someone who actually has done that swap or helped do one.  Capt, vile, or a couple of others would know if they would line up and bolt on.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18464
    • http://www.73-87chevytrucks.com
Re: Help needed please
« Reply #2 on: April 15, 2011, 06:45:29 pm »
You will have to cut the relief holes for the hinges if you are using a 73-80 cab.  the later ones will probably have less rust.
Logged

Offline 79chevykid

  • Newbie
  • Posts: 67
Re: Help needed please
« Reply #3 on: April 16, 2011, 12:33:51 pm »
The older style hood hinges are mounted to the fender where the newer one are on the top of the firewall, if you search u can find tons of info about the switch. There will be some fabrication you will need to do, I believe the winndshield wipers are different since the older trucks had no cowl pannel.
http://forum.73-87chevytrucks.com/smforum/index.php?topic=9070.0
Logged
1979 short box chevy custom deluxe (project)
Pages: [1]   Go Up
« previous next »