« previous next »
Pages: [1]   Go Down

Author Topic: Rear slider removal??  (Read 4079 times)

Offline Garrettsdad

  • New Users
  • Posts: 1
Rear slider removal??
« on: May 30, 2011, 01:12:13 pm »
What is the best way to remove a rear slider? Do you need special tools?   Thanks chris
Logged

Offline beastie_3

  • Senior Member
  • ****
  • Posts: 3170
  • Josh
    • My truck pics
Re: Rear slider removal??
« Reply #1 on: May 30, 2011, 02:20:44 pm »
It gets pushed out from the inside. Go easy and a little at a time. Fold the outer edge of the gasket so you can get it past the pinch weld.
Logged

Offline PromiseKeeper

  • Frequent Member
  • **
  • Posts: 438
Re: Rear slider removal??
« Reply #2 on: May 31, 2011, 09:06:24 pm »
I'd pull the gasket back a bit and lube things up with some spray window cleaner too. Just dont use anything petrolium based or you'll swell your rubber up.
Logged
1980 C-10 2WD short & wide. 305 auto.

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19181
Re: Rear slider removal??
« Reply #3 on: May 31, 2011, 09:10:21 pm »
If the rubber is rock hard and old your best bet is to buy a new seal and slice the old gasket, then push the window out. If the gasket is still in good shape, soapy water and a thin piece of roap or coated wire to work the assembly outward from the window frame.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline kevin53garcia

  • New Users
  • Posts: 1
Re: Rear slider removal??
« Reply #4 on: June 02, 2011, 07:22:08 am »
Quote from: PromiseKeeper on May 31, 2011, 09:06:24 pm
I'd pull the gasket back a bit and lube things up with some spray window cleaner too. Just dont use anything petrolium based or you'll swell your rubber up.

I do exactly same......
But just aware of the petroleum part, so thanks for that!!!
Logged
Pages: [1]   Go Up
« previous next »