« previous next »
Pages: [1] 2   Go Down

Author Topic: We are men. We never make mistakes.  (Read 7971 times)

Offline firefighter

  • Frequent Member
  • **
  • Posts: 462
We are men. We never make mistakes.
« on: January 13, 2012, 08:19:26 am »
We are men and we never make mistakes, right?
I feel I can say this here because I could never tell my wife this information.

So we got our first snowfall yesterday and I went out to the shop last night to get the snow blower started.
Now keep in mind, I've fabricated a street legal 1963 Chevy II Nova with a full roll cage narrowed rear end and supercharged nitrous injected motor.
I'm working on a ground up rebuild of a 1976 4x4 Chevy truck.
I've service trained people for my job in 3 different countries.
Don't ya think I could check the snow blower gas tank for fuel before pulling on the cord for 15 stinking minutes? I mean, I even had the plug out 3 times and got shocked twice checking for spark !!

I spent the next 30 minutes blowing snow in solitude, reflecting on what just happened, and chuckling.......
Logged

Offline thirsty

  • Senior Member
  • ****
  • Posts: 1289
    • Suitor's Garage
Re: We are men. We never make mistakes.
« Reply #1 on: January 13, 2012, 08:34:32 am »
When you were done you should have made yourself sit next to a wood stove drinking a beer or two thinking about what you just did. Kind of like a time out...haha
Logged
Real trucks are built, not bought Build thread

Give me a long enough lever and a place to stand, and I shall move the earth or break this bolt...Whatever, just hold my beer!

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: We are men. We never make mistakes.
« Reply #2 on: January 13, 2012, 09:06:25 am »
i dont know what to say. but when you said you got shocked how was this? did you stick your tong to the plug and pull the cord?
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline fitz

  • Senior Member
  • ****
  • Posts: 2085
Re: We are men. We never make mistakes.
« Reply #3 on: January 13, 2012, 09:08:16 am »
Thirsty, one of these days I have to go check out your wood stove. Sounds like a good time.
Logged

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: We are men. We never make mistakes.
« Reply #4 on: January 13, 2012, 09:25:22 am »
     I do believe I can say this with much cerainty, that since the world began, all men have done this at least once.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline PromiseKeeper

  • Frequent Member
  • **
  • Posts: 438
Re: We are men. We never make mistakes.
« Reply #5 on: January 13, 2012, 11:04:56 am »
This reminds me of a question we must ask of ourselves now and then...

"If a man goes deep into the woods and there are no women present to hear him talk, is he still wrong?"
Logged
1980 C-10 2WD short & wide. 305 auto.

Offline 78 Chevyrado

  • Z62 ON-ROAD
  • Site Supporters
  • Senior Member
  • ******
  • Posts: 2748
    • My Photobucket Site
Re: We are men. We never make mistakes.
« Reply #6 on: January 13, 2012, 11:17:12 am »
yeah worst one I did was took the starter off my car to have it tested because IT MUST BE bad, and I already checked everything else possible...  Or so I thought.

Turned out the battery cable connection at the battery was corroded.  But the car had a new starter on it anyway.  ;)

Thats the first thing I check on ANY car I ever look at now.
Logged
Kenny

1978 C-20, 350/400, 3.73, Graystone Metallic, Raceline Renegade 8 Wheels - 18x8.5, 275/70R18 BFG KO's

Offline black85k10

  • Newbie
  • Posts: 41
Re: We are men. We never make mistakes.
« Reply #7 on: January 13, 2012, 11:41:24 am »
did that one afternoon mowing. it was getting dark and the mower just stopped. to make it worse i called my dad to ask him if he had any idea what it could be. he asked does it have gas?
Logged
85 chevy k-10 350 th400

Offline SNWBLL

  • Newbie
  • Posts: 63
Re: We are men. We never make mistakes.
« Reply #8 on: January 13, 2012, 03:52:09 pm »
Oh the memories,
Went riding with a friend on 4-wheelers (ATVs) and mine quit on me. I fussed at it as he rode back to get a rope. I got frustrated because my friend had to tow me back home. My wife comes out and says "what happened?" I said this piece of junk died on me.
She asked "does it have gas".
I haven't won an argument since.
Logged
Mike
85 longbed
86 shortbed

Offline thirsty

  • Senior Member
  • ****
  • Posts: 1289
    • Suitor's Garage
Re: We are men. We never make mistakes.
« Reply #9 on: January 13, 2012, 07:17:21 pm »
Quote from: fitz on January 13, 2012, 09:08:16 am
Thirsty, one of these days I have to go check out your wood stove. Sounds like a good time.
If you ever get up into NH for anything you just let me know and there will be a spot next to the wood stove with your name on it with a cold beer on the cusp of freezing waiting!

A lot of life's mysteries and problems get solved sitting around this round black hot thing when it's cold out.


My truck building buddy (Oscar) spends his fair share of time sitting next to it also.
Logged
Real trucks are built, not bought Build thread

Give me a long enough lever and a place to stand, and I shall move the earth or break this bolt...Whatever, just hold my beer!

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Re: We are men. We never make mistakes.
« Reply #10 on: January 13, 2012, 08:05:11 pm »
Back when I was a young whipper snapper I had a few Mopars. My 71 dodge dart needed different tires on it. Why I don't really know as I didn't even have my licence yet! I was doing a stroke of business with two bumper jacks, a four way, and some 8x8 blocks! Passengers side came off slick as snot on a door knob! Drivers side I fussed, and feuded with broke a couple 1/2" drive chrome sockets, and two studs off with a borrowed 3/4" drive breaker bar. Then it dawned on me when my father who knew nothing about cars, but allot about bolts, and metal that they were left hand thread!!!!  ::)
Logged
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs

Offline firefighter

  • Frequent Member
  • **
  • Posts: 462
Re: We are men. We never make mistakes.
« Reply #11 on: January 13, 2012, 11:44:28 pm »
I now see that I am not the only man here who has made amusing silly mistakes.
Well, let's not call them mistakes. Let's call them moments of increasing intelligence.  ;D

Thanks for making me feel better.

And alas, the infamous wood stove, thirsty!! That thing is a vision of beauty, a real work of art. I wish I lived closer !!
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: We are men. We never make mistakes.
« Reply #12 on: January 14, 2012, 05:39:27 am »
i know i have made a couple but the main thing is, as long as you learn from them then its not really a mistake
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Re: We are men. We never make mistakes.
« Reply #13 on: January 14, 2012, 07:45:31 am »
I say all the time its only a mistake if you can't fix it!!!
Logged
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19182
Re: We are men. We never make mistakes.
« Reply #14 on: January 14, 2012, 08:05:59 am »
Agreed, just like my firewall.... I fixed it and it looks better and I don't know how it could have looked better than it did!

I remember when I worked in a dealership and the tech next to me was flipping out because the car he was working on crapped out while he was working on it. He swapped out the ECM, changed the ign module, pulled plugs, had the scanner on it, just acting like a complete jackass parts changer and he was a decent wrench. So I went over and was like wth are you doing? Is it out of gas? LOL yup
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠¯¯¯¯¯'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10
Pages: [1] 2   Go Up
« previous next »