« previous next »
Pages: [1]   Go Down

Author Topic: Heator Hose Connection  (Read 5407 times)

Offline altuschevy86

  • New Users
  • Posts: 2
  • Newbie
Heator Hose Connection
« on: January 23, 2013, 12:31:58 pm »
Installed heater core on 86 Chevy C10 that wasn't connected, need instructions on where to connect heater hose, to the engine block or water pump.
Logged

Offline bd

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 6621
Re: Heator Hose Connection
« Reply #1 on: January 23, 2013, 12:47:33 pm »
Take a look at this example... Illustration of heater hose routing
If you don't have the heater hose connection to the radiator, the 3/4" hose will connect to a fitting threaded into the top of the water pump.  The 5/8" hose connects to an intake manifold fitting located either at the right front or right rear, depending on model configuration.
Logged
Rich
It's difficult to know just how much you don't know until you know it.
In other words... if people learn by making mistakes, by now I should know just about everything!!!
87 R10 Silverado Fleetside 355 MPFI 700R4 3.42 Locker (aka Rusty, aka Mater)

Offline altuschevy86

  • New Users
  • Posts: 2
  • Newbie
Re: Heator Hose Connection
« Reply #2 on: January 23, 2013, 02:00:40 pm »
Thanks for the picture, found that after I posted this.
Logged
Pages: [1]   Go Up
« previous next »