« previous next »
Pages: [1]   Go Down

Author Topic: ignition switch  (Read 2907 times)

Offline chevy2011

  • Newbie
  • Posts: 5
  • Newbie
ignition switch
« on: March 24, 2014, 05:56:21 pm »
does the ignition switch on a 1979 K10 custom deluxe with 3 speed on column have a accessory position on the ignition switch?
« Last Edit: March 24, 2014, 06:12:51 pm by chevy2011 »
Logged

Offline bd

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 6621
Re: ignition switch
« Reply #1 on: March 24, 2014, 06:33:13 pm »
Yes - turn the key counterclockwise from Lock.
Logged
Rich
It's difficult to know just how much you don't know until you know it.
In other words... if people learn by making mistakes, by now I should know just about everything!!!
87 R10 Silverado Fleetside 355 MPFI 700R4 3.42 Locker (aka Rusty, aka Mater)

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: ignition switch
« Reply #2 on: March 24, 2014, 07:52:43 pm »
Quote from: bd on March 24, 2014, 06:33:13 pm
Yes - turn the key counterclockwise from Lock.

     You might have to push in on the key assembly a little.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline slammed79

  • Senior Member
  • ****
  • Posts: 1367
  • Thou shalt not drive stock
Re: ignition switch
« Reply #3 on: March 28, 2014, 07:43:54 pm »
If you're having trouble getting into it,  you might need to adjust the switch on the low side of the column.

Sent from my SM-N900T using Tapatalk

Logged
74 C10 Long bed 350/SM465 Lowered on 20's

Praise the lowered
Pages: [1]   Go Up
« previous next »