« previous next »
Pages: [1] 2   Go Down

Author Topic: How big is my lift?  (Read 11708 times)

Offline rugbychevyguy

  • Newbie
  • Posts: 16
  • Newbie
How big is my lift?
« on: July 08, 2015, 10:48:51 am »
I have an 84 k10 that was already lifted when i purchased it, i want to get new shocks and first need to find out how much it was previously lifted. I know i have to measure from frame to axle but i don't know what the original height was. Any suggestions on where to find that and any suggestions on type of shocks?

Thanks y'all

Sent from my SM-G920P using Tapatalk

Logged

Offline Jason S

  • Senior Member
  • ****
  • Posts: 1561
Re: How big is my lift?
« Reply #1 on: July 08, 2015, 11:24:56 am »
Quote
I know i have to measure from frame to axle but i don't know what the original height was.
Do you have lift blocks in the rear?  If so, you can measure the block height.  Can you post any photos?
Logged
1973 GMC K2500, Super Custom, Camper Special, 350, TH350, NP203, 4.10's
1974 Chevrolet K10, Custom Deluxe, 350, SM465, NP203, 3.73's

"1) Peace through strength; 2) Trust but verify; 3) Beware of evil in the modern world"

Offline rugbychevyguy

  • Newbie
  • Posts: 16
  • Newbie
Re: How big is my lift?
« Reply #2 on: July 08, 2015, 11:41:36 am »


I assume this is what you wanted

Sent from my SM-G920P using Tapatalk

Logged

Offline timthescarrd

  • Frequent Member
  • **
  • Posts: 326
Re: How big is my lift?
« Reply #3 on: July 08, 2015, 01:12:48 pm »
What size are those tires?
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: How big is my lift?
« Reply #4 on: July 08, 2015, 02:47:48 pm »
not a k10 with 8 lug rims
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline rugbychevyguy

  • Newbie
  • Posts: 16
  • Newbie
Re: How big is my lift?
« Reply #5 on: July 09, 2015, 10:47:28 pm »
It's vin says k10 but has a k30 rear end

Sent from my SM-G920P using Tapatalk

Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: How big is my lift?
« Reply #6 on: July 10, 2015, 12:07:03 am »
the front axle is only k20
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline rugbychevyguy

  • Newbie
  • Posts: 16
  • Newbie
Re: How big is my lift?
« Reply #7 on: July 10, 2015, 01:25:31 am »
How can you tell?

Sent from my SM-G920P using Tapatalk

Logged

Offline Don5

  • Registered Users
  • *
  • Posts: 229
  • Newbie
Re: How big is my lift?
« Reply #8 on: July 10, 2015, 01:40:43 am »
It has an 8 lug front end with, it looks like, small hubs. That means it is not a Dana 60 1 ton front end. :) The rear end is a 8 lug Fully floating 14 bolt rear end. What size tires are on it? Can you measure from the top of the rear axle to the bottom of the frame at the bump stop? My truck is a 1/2 ton with a 6 inch lift and that distance is 17 inches I believe. It looks like a 2 1/2 inch add a leaf on the rear too.
Logged
It's been a LONG time since I have been called a newbie. Just sayin....

1979 GMC K15 355, SM 465, 205, 3.73 Dana 44 with a Spartan Locker, 12 bolt Eaton limited slip and 6 inch lift with 36 x 12.50 Super Swamper TSL's.

Offline rugbychevyguy

  • Newbie
  • Posts: 16
  • Newbie
Re: How big is my lift?
« Reply #9 on: July 10, 2015, 11:02:06 am »
Its 14in from rear axle to frame and my tires are 285/75r16

Sent from my SM-G920P using Tapatalk

Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: How big is my lift?
« Reply #10 on: July 10, 2015, 12:55:53 pm »
Quote from: Don5 on July 10, 2015, 01:40:43 am
It has an 8 lug front end with, it looks like, small hubs. That means it is not a Dana 60 1 ton front end. :)
x2

dana 60 hub is about 4". there are dana 44 that look similar to it but as you can see compared to yours theres a big difference. aint no biggie unless you plan on mudding with 38+" tires
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline timthescarrd

  • Frequent Member
  • **
  • Posts: 326
Re: How big is my lift?
« Reply #11 on: July 10, 2015, 04:24:17 pm »
285/75/16 tires are just over 32.5" tall (equivalant to a 33x11.5). Based on that, I would say you have a 2.5" lift front and rear
Logged

Offline rugbychevyguy

  • Newbie
  • Posts: 16
  • Newbie
Re: How big is my lift?
« Reply #12 on: July 11, 2015, 12:42:17 pm »
How much do you think it would cost to raise that to a 4" lift? And if i did that what size tires would look right?

Sent from my SM-G920P using Tapatalk

Logged

Offline rugbychevyguy

  • Newbie
  • Posts: 16
  • Newbie
Re: How big is my lift?
« Reply #13 on: July 11, 2015, 12:44:04 pm »
Irish, i know it is definitley a k10 front end i was just curious how you could tell from a picture haha. That is really cool you can do that and thank you for the information!

Sent from my SM-G920P using Tapatalk

Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: How big is my lift?
« Reply #14 on: July 11, 2015, 03:06:27 pm »
lol not a k10 (for say) the only difference in a k10 6 lug and k20 8 lug front end is from the hubs out (year respective).
now this part is a complete guess, but if 33s fit like that you should be good with 36 its only 1.5" on each side. i would think the lift is MAYBE close to 6" if we could get a list of measurements together from top of axle to frame (not bump stop) we could make a chart.
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes
Pages: [1] 2   Go Up
« previous next »