« previous next »
Pages: [1]   Go Down

Author Topic: GAS TANK REPLACEMENT  (Read 5802 times)

Offline cal2200

  • Newbie
  • Posts: 13
  • Newbie
GAS TANK REPLACEMENT
« on: July 08, 2015, 06:06:47 pm »
I need to replace the driver side gas tank in my 1986 Chevrolet K10 350 4x4. What is better? Metal or Plastic? Do I need rubber or some other type of cushion to prevent rubbing from the brackets?
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: GAS TANK REPLACEMENT
« Reply #1 on: July 08, 2015, 06:16:07 pm »
ive only seen metal replacement tanks. and yes put some sort of anti squeak straps on the tank, two on the bottom and two on top
« Last Edit: July 08, 2015, 07:25:45 pm by Irish_Alley »
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline cal2200

  • Newbie
  • Posts: 13
  • Newbie
Re: GAS TANK REPLACEMENT
« Reply #2 on: July 08, 2015, 06:21:39 pm »
I know that I just mean do I need some type of rubber or something to prevent the metal on metal vibration from crating leaks
Logged

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: GAS TANK REPLACEMENT
« Reply #3 on: July 08, 2015, 07:04:15 pm »
I bought a poly tank from JC Whitney.  Was a great replacement IMO
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline bd

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 6600
Re: GAS TANK REPLACEMENT
« Reply #4 on: July 08, 2015, 07:45:49 pm »
Quote from: cal2200 on July 08, 2015, 06:21:39 pm
I know that I just mean do I need some type of rubber or something to prevent the metal on metal vibration from crating leaks

IIRC the factory used ~1/8" thick, asphalt infused, felt-like paper strips between the tank, saddles and straps to help alleviate rattles, squeaks and metal-to-metal abrasion.  The paper was treated to help ensure adequate service life.
Logged
Rich
It's difficult to know just how much you don't know until you know it.
In other words... if people learn by making mistakes, by now I should know just about everything!!!
87 R10 Silverado Fleetside 355 MPFI 700R4 3.42 Locker (aka Rusty, aka Mater)

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19180
Re: GAS TANK REPLACEMENT
« Reply #5 on: July 08, 2015, 07:46:12 pm »
I have a poly tank sitting upstairs in my garage but I have yet to put it on anything. I'll be putting a custom aluminum tank on my 74.  The metal tanks are cheap and readily available and as Irish said, use the insulators between the tank and the straps. You can paint the tank too for protection from rust.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠¯¯¯¯¯'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline philo_beddoe

  • Senior Member
  • ****
  • Posts: 2753
  • 77 C-10
Re: GAS TANK REPLACEMENT
« Reply #6 on: July 18, 2015, 07:38:54 pm »
Use metal, but coat it "chassis coat" it will last a 1000 years rust free!


Sent from my iPhone using Tapatalk
Logged
Behold, the day of the LORD cometh, and thy spoil shall be divided in the midst of thee.  Zechariah 14:1
Pages: [1]   Go Up
« previous next »