« previous next »
Pages: [1]   Go Down

Author Topic: what size socket for rear axel nut on a 1979 3/4 ton ?  (Read 9918 times)

Offline VTK5Mudder

  • Newbie
  • Posts: 64
what size socket for rear axel nut on a 1979 3/4 ton ?
« on: November 26, 2015, 11:16:46 pm »
anybody know what size socket I need to get for the rear end  nut on my 1979 3/4 ton ? I need to pull it apart so I can get to my wheel cylinders .
Logged

Offline werewolfx13

  • Site Supporters
  • Junior Member
  • ******
  • Posts: 841
Re: what size socket for rear axel nut on a 1979 3/4 ton ?
« Reply #1 on: November 26, 2015, 11:38:28 pm »
You need one of the 6 stud type sockets. Most parts stores have them in their rental/loaner program.
Logged
Chris
'83 Chevy c10 Silverado SWB
'76 Chevy k20 LWB 6.5'x8' Flatbed
“I know that you believe you understand what you think I said, but I'm not sure you realize that what you heard is not what I meant.”

Offline VTK5Mudder

  • Newbie
  • Posts: 64
Re: what size socket for rear axel nut on a 1979 3/4 ton ?
« Reply #2 on: November 27, 2015, 01:59:42 am »
thanks , is that all I need to ask them for is a 6 stud socket for my gm truck ?
Logged

Offline GregL

  • Newbie
  • Posts: 34
  • Newbie
Re: what size socket for rear axel nut on a 1979 3/4 ton ?
« Reply #3 on: November 27, 2015, 04:18:40 pm »
 Or you can just use a hammer and punch.
Logged

Offline hatzie

  • Junior Member
  • ***
  • Posts: 771
Re: what size socket for rear axel nut on a 1979 3/4 ton ?
« Reply #4 on: November 29, 2015, 12:06:34 pm »
Quote from: werewolfx13 on November 26, 2015, 11:38:28 pm
You need one of the 6 stud type sockets. Most parts stores have them in their rental/loaner program.

Autozone etc loan these tools.
http://www.amazon.com/Powerbuilt-648475-Spindle-Socket-Outer/dp/B0015UWW64



From orbit on my Android.

Logged
SVC & wiring mans --> Here http://tinyurl.com/7387BRD-SVCMAN or My Bucket @ http://tinyurl.com/SQ-SVCMAN
Parts & Illustr Books -->http://tinyurl.com/SqParts
GMSTG Textbooks-->http://tinyurl.com/STG-TEXTBK
Radio Manuals-->http://tinyurl.com/DELCORADSVC

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19210
Re: what size socket for rear axel nut on a 1979 3/4 ton ?
« Reply #5 on: November 29, 2015, 12:36:05 pm »
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline josh0325

  • Newbie
  • Posts: 36
  • Newbie
Re: what size socket for rear axel nut on a 1979 3/4 ton ?
« Reply #6 on: November 29, 2015, 02:08:14 pm »
Which axle nut are you referring to.  The axle nut for the wheel bearings, or the pinion yoke.
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19210
Re: what size socket for rear axel nut on a 1979 3/4 ton ?
« Reply #7 on: November 29, 2015, 06:57:56 pm »
Assuming wheel bearings since he's trying to get to his wheel cylinders.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline VTK5Mudder

  • Newbie
  • Posts: 64
Re: what size socket for rear axel nut on a 1979 3/4 ton ?
« Reply #8 on: November 30, 2015, 09:58:42 pm »
wheel bearing , sorry my fault . my son picked a socket up it only has 4 prongs so hope it works its what the parts store told him so will see . was hoping to get a loner but they didn't have one which I guess in a way was ok since we had crappy weather up here last weekend going to try for this weekend need to get it done its my plow truck !
Logged

Offline hatzie

  • Junior Member
  • ***
  • Posts: 771
Re: what size socket for rear axel nut on a 1979 3/4 ton ?
« Reply #9 on: December 01, 2015, 09:55:01 am »
4 pins are for hub nuts on front axles. 
6 pins are for the 14 bolt hub nuts.
They aren't interchangeable.

You can get them off with a pin punch. Setting the proper bearing preload and not boogering up the slots without the right tool is really kind of difficult.

From orbit on my Android.
« Last Edit: December 01, 2015, 10:00:28 am by hatzie »
Logged
SVC & wiring mans --> Here http://tinyurl.com/7387BRD-SVCMAN or My Bucket @ http://tinyurl.com/SQ-SVCMAN
Parts & Illustr Books -->http://tinyurl.com/SqParts
GMSTG Textbooks-->http://tinyurl.com/STG-TEXTBK
Radio Manuals-->http://tinyurl.com/DELCORADSVC

Offline josh0325

  • Newbie
  • Posts: 36
  • Newbie
Re: what size socket for rear axel nut on a 1979 3/4 ton ?
« Reply #10 on: December 01, 2015, 09:07:13 pm »
Sorry, that was my ignorance, I didn't read your post properly.  Yes, you need a Chevy 4WD 6 stud socket
Logged
Pages: [1]   Go Up
« previous next »