« previous next »
Pages: [1]   Go Down

Author Topic: Valve cover question  (Read 3808 times)

Offline Gearhead427

  • New Users
  • Posts: 2
Valve cover question
« on: February 22, 2006, 09:47:00 pm »
Hello I'm new here and have a really stupid question I have a 81 Gmc with a 305 and the valve covers leak like crazy well i got the gaskets and was about pull it apart but saw that the pass side valve cover is partly covered by the EGR valve and was wondering if i need to remove this to replace the valve cover gasket

Logged

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Re: Valve cover question
« Reply #1 on: February 23, 2006, 07:29:00 am »
You should be able to sneak it by. its tight but doable.

Logged
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs

Offline Lt.Del

  • Andy aka:SgtDel
  • Senior Member
  • ****
  • Posts: 3864
  • DelbridgePhotography.com
    • www.delbridge.net
Re: Valve cover question
« Reply #2 on: February 23, 2006, 07:43:00 am »
If a 305 is similar to a 350, you will have no problem. I have taken my valve covers off many times w/out worrying about the EGR valve.

If a 305 is a little different, there are only two bolts holding it down...maybe just loosen them a little, being careful w/ the EGR gasket, and push it out of the way.

SgtDel

Logged

Offline Gearhead427

  • New Users
  • Posts: 2
Re: Valve cover question
« Reply #3 on: February 23, 2006, 07:53:00 am »
Thanks for the replies guys i'll try to get it out in the next day or two. :D  

Logged
Pages: [1]   Go Up
« previous next »