« previous next »
Pages: [1] 2   Go Down

Author Topic: Lug nut and stud Just spins  (Read 9209 times)

Offline AmericaMade

  • Newbie
  • Posts: 32
  • Newbie
Lug nut and stud Just spins
« on: February 02, 2018, 03:26:45 pm »
Today I figured I’d put my new center caps on. 20min right? Wrong.
One lug stud decided to come loose it appears.
This stud was already replaced prior to me purchasing the truck. 83’ C10 Scottsdale shorty
I finger tightened all the lug nuts and proceeded in the star pattern with the torque wrench starting 30, but at that point it just started spinning.
I think the stud came loose. Now the lug nut is stuck. any ideas how to get it off?
I tried putting pressure on it and using channel locks to get it to go but no luck.

Link to video:
https://streamable.com/uk5wn
« Last Edit: February 02, 2018, 03:29:25 pm by AmericaMade »
Logged
1983 C10 Scottsdale 383 Stroker TH/350 Holley 850 Double pumper carb

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19180
Re: Lug nut and stud Just spins
« Reply #1 on: February 02, 2018, 04:10:16 pm »
Take all of the other lug nuts off and use the wheel to apply outward pressure. Use your impact to zip it off and reset the stud.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠¯¯¯¯¯'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline AmericaMade

  • Newbie
  • Posts: 32
  • Newbie
Re: Lug nut and stud Just spins
« Reply #2 on: February 02, 2018, 04:22:34 pm »
Dont have an impact (please no bully) yet.
 is it still possible w/out one?
Logged
1983 C10 Scottsdale 383 Stroker TH/350 Holley 850 Double pumper carb

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19180
Re: Lug nut and stud Just spins
« Reply #3 on: February 02, 2018, 04:24:18 pm »
Do yourself a favor and invest in an impact gun. If you don't have a compressor you can buy a cordless one or even an electric one. You can try or just take it to a shop, they'll probably fix it for under $50 bucks.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠¯¯¯¯¯'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline AmericaMade

  • Newbie
  • Posts: 32
  • Newbie
Re: Lug nut and stud Just spins
« Reply #4 on: February 02, 2018, 05:09:10 pm »
Yeah I figured... thanks for the input
Logged
1983 C10 Scottsdale 383 Stroker TH/350 Holley 850 Double pumper carb

Offline Captain Swampy

  • Junior Member
  • ***
  • Posts: 504
  • Wisconsin
Re: Lug nut and stud Just spins
« Reply #5 on: February 02, 2018, 08:26:33 pm »
Try a grinder. Do one side, then spin a half turn and do the other. Pry it out as far as possible. You need a new stud anyway. After grinding both sides of the nut, a hammer and chisel should finish it off.
Logged
1987  350TBI 700R4  4X4  4.56 gears  33" BFG All Terrain


http://forum.73-87chevytrucks.com/smforum/index.php?topic=32209.0

Offline PBritty

  • Newbie
  • Posts: 23
  • Newbie, but working on cars for 30 years.
Re: Lug nut and stud Just spins
« Reply #6 on: February 03, 2018, 02:04:24 pm »
Grind it


Sent from my iPhone using Tapatalk
Logged
PBritty
North Georgia
1986 Silverado K10 (85% Complete)
1986 Silverado K10 (35% Complete)

Offline AmericaMade

  • Newbie
  • Posts: 32
  • Newbie
Re: Lug nut and stud Just spins
« Reply #7 on: February 03, 2018, 03:23:20 pm »
How? I dont have much room to get to the stud. Or do you mean just grind the nut, basically damaging the lug nut?
Logged
1983 C10 Scottsdale 383 Stroker TH/350 Holley 850 Double pumper carb

Offline AmericaMade

  • Newbie
  • Posts: 32
  • Newbie
Re: Lug nut and stud Just spins
« Reply #8 on: February 03, 2018, 04:04:19 pm »
Does anyone know whay length stud this might be? 84’ C10
Logged
1983 C10 Scottsdale 383 Stroker TH/350 Holley 850 Double pumper carb

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Lug nut and stud Just spins
« Reply #9 on: February 03, 2018, 04:15:46 pm »
think thats going to depend on your lug nuts. cant see the video but one you get the wheel off measure another lug and see how much you can see sticking out of the hub or the threads then go to the local parts store and compare it to what they have
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline AmericaMade

  • Newbie
  • Posts: 32
  • Newbie
Re: Lug nut and stud Just spins
« Reply #10 on: February 03, 2018, 04:19:28 pm »
Sounds good... ordered a dremel will use this to remove the dang thing.
For the cost of parts and my time it’s probably cheaper going to a shop 🤣🤣
Logged
1983 C10 Scottsdale 383 Stroker TH/350 Holley 850 Double pumper carb

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Lug nut and stud Just spins
« Reply #11 on: February 03, 2018, 04:38:07 pm »
well considering the stud and lug are hardened youll have a heck of a time with a dremel. i know my dad years ago when i cross threaded a stud took a socket and extension and jumped on it a few times to break the stud.
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline 68post

  • Newbie
  • Posts: 8
  • Newbie
Re: Lug nut and stud Just spins
« Reply #12 on: February 03, 2018, 10:12:23 pm »
I've had this happen, I removed the axle and welded the stud to remove the nut.
Logged

Offline AmericaMade

  • Newbie
  • Posts: 32
  • Newbie
Re: Lug nut and stud Just spins
« Reply #13 on: February 04, 2018, 09:11:13 am »
Quote from: Irish_Alley on February 03, 2018, 04:38:07 pm
well considering the stud and lug are hardened youll have a heck of a time with a dremel. i know my dad years ago when i cross threaded a stud took a socket and extension and jumped on it a few times to break the stud.

I figure I may be able to get enough clearance to get at the stud to use the dremel. If not I’ll just snap it like you said. Thats was my neighbors suggestion, get a bar on it and jump to snap it.
Ill give it a go post back..
Logged
1983 C10 Scottsdale 383 Stroker TH/350 Holley 850 Double pumper carb

Offline AmericaMade

  • Newbie
  • Posts: 32
  • Newbie
Re: Lug nut and stud Just spins
« Reply #14 on: February 05, 2018, 05:56:39 pm »
Just to update. I removed the stud by getting a socket and my breakerbar, thought the breaker bar would break, it didnt. Proceeded going up and down until the nuts thread basically flattened and it slid off. The stud didnt break. Then another stud had to replaced as the nut on that one was stuck as well, squealed like a pig coming off. They are stripped as heck...
I may just replace all of them since I am at. Will also replace the shoes on both rear wheels.







« Last Edit: February 06, 2018, 07:22:43 am by Irish_Alley »
Logged
1983 C10 Scottsdale 383 Stroker TH/350 Holley 850 Double pumper carb
Pages: [1] 2   Go Up
« previous next »