« previous next »
Pages: [1]   Go Down

Author Topic: just a question about motors  (Read 3676 times)

Offline magnum59

  • Newbie
  • Posts: 5
just a question about motors
« on: April 22, 2007, 02:50:57 pm »
We will be removing a 4.3 from a 1985 chevy c10 custom pickup and would  really like to up grade to a 305- my question is -is this possible with out changing everything in the drivetrain?The 4.3 is tost any way and we are looking at a crate  305 for about the same price as the 4.3.
 thanks
magnum
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19180
Re: just a question about motors
« Reply #1 on: April 22, 2007, 09:11:52 pm »
You'll have to change a few things...but nothing drivetrain related. I have a 305 for sale if you are anywhere local....
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Re: just a question about motors
« Reply #2 on: April 22, 2007, 09:14:36 pm »
Bigger radiator, clutch if its a standard, exhaust manifolds, etc.
Logged
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs

Offline red4wd

  • Registered Users
  • *
  • Posts: 240
Re: just a question about motors
« Reply #3 on: April 22, 2007, 09:44:38 pm »
Distributor, intake, exhaust manifolds are the main things if you are doing a crate motor.  I am sure you would have to move the mounts on the frame as well.  You might have to have a fan shroud to go with the larger radiator that blazin mentioned.
Logged

123pugsy

  • Guest
Re: just a question about motors
« Reply #4 on: April 23, 2007, 11:41:41 am »
If you don't have A/C ,the small rad may be sufficient. Had a small rad with a 305 and it kept cool OK.That was in an 88.
Logged
Pages: [1]   Go Up
« previous next »