« previous next »
Pages: 1 ... 8 9 [10] 11 12 ... 30   Go Down

Author Topic: Mutt Project  (Read 342331 times)

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19183
Re: Mutt Project
« Reply #135 on: February 28, 2009, 02:56:08 pm »
When I have time I will. For now I will probably just throw a flex fan at it just to get it going. I feel spring coming and want to spend as little time working on trucks and crap as possible and get out on my bike. I also need to build a new front walkway to my garage. It's an icy hill now turned to muddy pit! The nice thing is a lot of my 74's parts are going right in it. The rear slider, the Windshield, the door glass and weatherstripping which I just replaced even on the vent windows. I have new doors and the radiator support ready to rock. I also have the dual gas tank set up from my 74 but I'll have to get new sending units and pumps because it's going to be TBI which will probably cost about $400 bucks.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18464
    • http://www.73-87chevytrucks.com
Re: Mutt Project
« Reply #136 on: March 01, 2009, 06:36:16 pm »
That is what the spring on my Burb looked like when we were diagnosing it.  I couldn't find the spring in any kit other that the whole upper section.  I found a larger spring for it from a Camaro guy and bought 2 of them.
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19183
Re: Mutt Project
« Reply #137 on: March 08, 2009, 08:55:02 pm »
Well I rebuilt the TBI unit. I got the spring from a guy who sells them on eBay for $12 bucks. I ordered both sending units and pumps. So the next thing is to start hooking up the ignition system, ECM, sensors, and fuel system. More pix soon.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19183
Re: Mutt Project
« Reply #138 on: March 12, 2009, 01:00:09 pm »
More pix





« Last Edit: September 06, 2017, 11:37:24 am by VileZambonie »
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18464
    • http://www.73-87chevytrucks.com
Re: Mutt Project
« Reply #139 on: March 12, 2009, 03:19:53 pm »
NICE!
Logged

Offline JRConnieK10

  • Junior Member
  • ***
  • Posts: 818
Re: Mutt Project
« Reply #140 on: March 12, 2009, 03:50:33 pm »
Man, thats nice.
Logged
'85 K10 LWB 350/SM465
BUILT NOT BOUGHT

Offline ccz145a

  • Senior Member
  • ****
  • Posts: 1393
Re: Mutt Project
« Reply #141 on: March 12, 2009, 04:12:10 pm »
Oooo my, that's purty.
Logged
1975 C10 Silverado LWB, 454CID, TH400, 10bolt 3.42
11MPG Downhill w/tailwind (but there ain't no hills here)

Offline the dan

  • Frequent Member
  • **
  • Posts: 321
Re: Mutt Project
« Reply #142 on: March 15, 2009, 12:02:51 am »
why tbi? personally i think its one of the most sluggish fi used
Logged
83 C10 Pro-touring, Forged 408 Stroker LS, Paxton supercharger, T56 magnum, Detroit 9", and horrible paint

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19183
Re: Mutt Project
« Reply #143 on: March 15, 2009, 12:38:16 pm »
Better driveability and fuel economy. I had a TBI 355 in my 88 V10 Blazer and there was nothing sluggish about it. It would roast 35"s and got good mileage and it was cheap!
« Last Edit: July 17, 2017, 01:49:34 pm by VileZambonie »
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline baddogg79

  • Registered Users
  • *
  • Posts: 120
Re: Mutt Project
« Reply #144 on: March 15, 2009, 03:44:42 pm »
That looks great! When I had my 94 Z71, it was far from sluggish. I regret selling that thing :'(
Logged

Offline eventhorizon66

  • Senior Member
  • ****
  • Posts: 1909
Re: Mutt Project
« Reply #145 on: March 15, 2009, 04:03:39 pm »
Just because I'm nosy, what are the specs on the engine?  Did you end up reusing the crank or stroking it like you are considering a while back?

Also is that throttle body painted or has it been media blasted?
« Last Edit: March 15, 2009, 04:05:22 pm by eventhorizon66 »
Logged
'85 C10 SWB 350 700R4 TKO600

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19183
Re: Mutt Project
« Reply #146 on: March 15, 2009, 07:15:43 pm »
I went against going with the stroker just bc I really don't need it and this truck is just being built for haha's. I certainly don't need this truck but it's graciously accepting all of the organs from my 74. The block is a one piece 4 bolt 350 that I got from 86chevysilverado. I bored it .030" over, hypereutectic flat tops, .465 -.488 lift on the cam, double roller chain, vortec heads that I rebuilt (stole em off of a Chevy Tahoe) 3 angle seat, 30° back cut on the valves. Air gap vortec intake with tbi adapter. 88 up Headers I'll skip all the other boring details.

As far as the tbi goes, after I ripped it apart I soaked it in the acid bath over the weekend and once I cleaned it up I painted it.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline 69byrd

  • Senior Member
  • ****
  • Posts: 1167
  • Haulin!
Re: Mutt Project
« Reply #147 on: March 15, 2009, 07:49:45 pm »
Its looking great! Man I wish I could build a truck just for haha's. ;D
Logged
84 C-10 Stepside       
54 Chevy Truck
Gotta Love Those Stepsides!
http://s493.photobucket.com/albums/rr299/69byrd/?start=all

Offline eventhorizon66

  • Senior Member
  • ****
  • Posts: 1909
Re: Mutt Project
« Reply #148 on: March 16, 2009, 01:56:45 pm »
So I take it we're talking this cam.  I didn't realize TBI would get along with that large a cam.
« Last Edit: April 18, 2009, 01:54:21 am by eventhorizon66 »
Logged
'85 C10 SWB 350 700R4 TKO600

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19183
Re: Mutt Project
« Reply #149 on: November 16, 2009, 05:44:10 pm »
Sorry Event, I missed your post. Yeah it'll work fine and dandy. I took a long break from this project as I've been so busy and enjoyed as much riding weather as possible. I have to finish hooking everything up and I'll be getting ready to fire it up hopefully very soon!
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10
Pages: 1 ... 8 9 [10] 11 12 ... 30   Go Up
« previous next »