« previous next »
Pages: [1]   Go Down

Author Topic: balljoints  (Read 3235 times)

Offline hotrod24

  • Senior Member
  • ****
  • Posts: 1696
balljoints
« on: December 30, 2007, 08:10:13 pm »
hey i have a 78 chevy truck and wanted to know how to check my balljoints and see if thay need replaced
« Last Edit: December 30, 2007, 08:12:49 pm by hotrod24 »
Logged
1980 1/2 ton shortbed project...
1978 pontiac grand prix...

Offline greenmonster

  • Registered Users
  • *
  • Posts: 193
Re: balljoints
« Reply #1 on: December 30, 2007, 08:46:02 pm »
Jack it up and grab the tire in the 12 o'clock and 6 o'clock position and see if you can wiggle it.
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19181
Re: balljoints
« Reply #2 on: December 30, 2007, 10:57:03 pm »
If your truck is 2wd you will need to jack it up underneath the lower control arm to unload the load carrying balljoint (do not jack it by the frame). Then insert a prybar underneath the tire and lift up and down while observing the balljoints.

If it's 4wd you can jack it by the frame or by the axle.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10
Pages: [1]   Go Up
« previous next »