JJSZABO Fleetside

[JJSZABO]

Here are some pictures of my doors after epoxy, and three coats of 2K primer.

This picture is with guide coat sprayed on so I can start sanding:


Starting to sand with 320 sand paper:


Keep sanding until all the guide coat comes off:


Door finished, waiting to be wax and grease removed, then sealer (reduced epoxy) then color and clear:

[82chevy]

thats looking pretty good. cant wait to see it painted. i just finished painting my truck minus the bed today. so how much longer before u have everything done? haha

[JJSZABO]

I am doing it piece by piece.  I have the hinges, hood and bed left to do.  I'm hoping to have the painting completed by the end of February.  It's been a long process 

[79SHORTWIDE]

Looks really good. I wish I was ready to start priming! Not even close yet.
The invite is still open for you to come to Austin and do my body and paint......
I'll even help!

[77c15]

Are those new doors, your originals, or replacements?

[JJSZABO]

those are replacements I picked up at the junk yard.  They are off of a 1991 Suburban.  My originals were too much work to try and repair.

Thanks for the compliments.

[Blazin]

Lookin good.

[JJSZABO]

Here is an update on my project:

I do bodywork and paint in my heated detached garage and assembly in my attached UNheated garage:

Time for some wiring:
(ignore the orange peel in my door )
 


I have the interior lights, heater fan working along with the power windows and door locks.  Had to replace the drivers side lift motor (still have all my fingers - THANKS to this forum and Jeff's 73-87.com/garage site).

I have the wires going to their respective place but have not tied most in:


Truck as it sits right now:


I have the bottom of the hood painted and should finish painting the top this weekend.

Thanks for looking - Jeff

[ccz145a]

I like that blue, man. What is it? Looking sharp, keep up the good work.

[Captkaos]

Jeff, I am going to merge this with your other post?  Looking really good BTW.

[JJSZABO]

Thanks for the compliments

The blue is Southern Polyurathane inc. viper blue.

That's good Chris - I didn't know where to add updates since I have many threads started

[Captkaos]

I can merge all of them into a rides thread and you can update it as you go...

[JJSZABO]

Ok that will be fine - thanks Chris

[82chevy]

it looks like its coming together nicely. i like the engine you got in there too. so r u going to give this to your son when ur done or keep it for yourself?? haha

[hotrod24]

very nice very nice looks like fun i can not wait to get started on mine