« previous next »
Pages: [1]   Go Down

Author Topic: seam sealer  (Read 5551 times)

Offline plowking_90

  • Registered Users
  • *
  • Posts: 124
seam sealer
« on: February 11, 2008, 02:22:26 pm »
where can i find a factory grade seam sealer like the use in the cabs and beds of our trucks?
Logged

Offline HAULIN IT

  • Senior Member
  • ****
  • Posts: 1542
Re: seam sealer
« Reply #1 on: February 11, 2008, 02:30:42 pm »
Plowking, Any good autobody supply store should have some. The best I have found is a two part type made by Kent, which I believe is sold only through a distributor. It is rather expensive (about $35 a tube). Maybe you could check with a local bodyshop & see if they have access to it. There are other, more readily available sealers from Fusor & 3M also. Lorne
Logged

Offline plowking_90

  • Registered Users
  • *
  • Posts: 124
Re: seam sealer
« Reply #2 on: February 11, 2008, 02:43:12 pm »
do you think a store like napa or advance auto will carry something like this?
Logged

Offline flthead

  • Newbie
  • Posts: 8
Re: seam sealer
« Reply #3 on: February 11, 2008, 04:15:51 pm »
been doing body work for ever , i use this 3m sealer     http://solutions.3m.com/wps/portal/3M/en_US/3MAutomotive/Aftermarket/Products/Product-Catalog/?PC_7_RJH9U5230GE3E02LECFTDQCEK3_nid=GSC5NRW78Tbe6DTWTJQPBBgl     i use a little prep solvent with a acid brush to flow it out
Logged
37 p.u. 44 g506 military .54 panel  65 p.u. 70 p.u.  82. p. u.

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19181
Re: seam sealer
« Reply #4 on: February 11, 2008, 05:05:55 pm »
That's how I do it too flthead. Works mint. Any decent autoparts store will have the 3m
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline the_legend_1981

  • Frequent Member
  • **
  • Posts: 288
Re: seam sealer
« Reply #5 on: February 11, 2008, 07:21:27 pm »
how much does the 3m go for?
« Last Edit: February 11, 2008, 07:23:37 pm by the_legend_1981 »
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19181
Re: seam sealer
« Reply #6 on: February 11, 2008, 08:21:01 pm »
just google search the kind you want http://www.levineautoparts.com/3mulause.html
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Dragon

  • Junior Member
  • ***
  • Posts: 642
Re: seam sealer
« Reply #7 on: February 12, 2008, 10:44:39 pm »
GM has been using 3M Sealers since the 1970's when our trucks were new... You can even go down to your Local Stealership Parts Dept for some, Pay 2-3times the price the Parts/Autobody Supply Stores want, and just get a GM Labeled Box & Tube, with 3M in the fine print ;D
Logged
Dragon
08 Magnum-New Toy
96 Caprice 9C1-Who Knows
96 GMC ECLWB & 92 Chevy ECLWB
77 GMC K25 HS-Gone but Not Forgotten
Pages: [1]   Go Up
« previous next »