« previous next »
Pages: [1]   Go Down

Author Topic: chrome striping  (Read 3673 times)

Offline hotrod24

  • Senior Member
  • ****
  • Posts: 1696
chrome striping
« on: June 29, 2008, 03:54:01 pm »
ok the chrome striping that is at the top of the drivers and passenger side window, do they slide out?
« Last Edit: June 29, 2008, 04:52:57 pm by hotrod24 »
Logged
1980 1/2 ton shortbed project...
1978 pontiac grand prix...

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19182
Re: charme stiping
« Reply #1 on: June 29, 2008, 04:12:53 pm »
say what?  ???
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline dumbucket1

  • Too Many Trucks
  • Junior Member
  • ***
  • Posts: 597
  • Coal Hauler
Re: charme stiping
« Reply #2 on: June 29, 2008, 04:39:29 pm »
do you mean chrome strips? as in the rain gutters? they unbolt if so
Logged
Chevy and GMC trucks ranging from 1973 to 2007

Offline hotrod24

  • Senior Member
  • ****
  • Posts: 1696
Re: charme stiping
« Reply #3 on: June 29, 2008, 04:44:07 pm »
yea mine unscrews but when i go to take one of the screws out the screw driver is to the side, so it wont come out but i thought that one peice slid out.
« Last Edit: June 29, 2008, 04:47:05 pm by hotrod24 »
Logged
1980 1/2 ton shortbed project...
1978 pontiac grand prix...

Offline biodiesel84

  • Newbie
  • Posts: 62
Re: chrome striping
« Reply #4 on: June 29, 2008, 06:32:35 pm »
you just gotta get the screwdriver on it just enough to get it off...if you can't, then maybe get some pliers on the drip rail where the screw is and bend it out of the way...I took mine off and remember a couple of them being a pain to get off, but I didn't have to bend any of them...

Chuck
Logged

Offline hotrod24

  • Senior Member
  • ****
  • Posts: 1696
Re: chrome striping
« Reply #5 on: June 29, 2008, 07:26:23 pm »
thanks
Logged
1980 1/2 ton shortbed project...
1978 pontiac grand prix...

Offline ccz145a

  • Senior Member
  • ****
  • Posts: 1393
Re: chrome striping
« Reply #6 on: June 30, 2008, 09:45:41 am »
You can get a bottle opener and gently remove the outer stainless from the gutter. that would give you a little more room and for some of the screws, a notched access way.

I have always managed to remove them with out removing this piece, though.
Logged
1975 C10 Silverado LWB, 454CID, TH400, 10bolt 3.42
11MPG Downhill w/tailwind (but there ain't no hills here)
Pages: [1]   Go Up
« previous next »