« previous next »
Pages: [1] 2 3   Go Down

Author Topic: dash tachometer  (Read 33094 times)

Offline Black454Truck

  • New Users
  • Posts: 1
dash tachometer
« on: October 08, 2008, 11:34:44 am »
I have a 79 chevy stepeside that I am working on.  I found a guage cluster out of a 76 or 77 1 ton that had a factory tach and a small gas guage.  I cannot get the tach to work.  I have several tachometers and I cant get any of them to work.  I am using am using a stock HEI.

I have the factory tach wiring harness and it has some kind of condesor that plugs in to the wires that goes from the tach to the guage, but the wires are broke off on side of it so i didn't us it.  Has anyone else installed a factory tach in their truck and ran in to any problems?

Thanks in advance,
Joe
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19181
Re: dash tachometer
« Reply #1 on: October 08, 2008, 02:31:36 pm »
Well most of the factory tachs were garbage and broke so yours probably doesn't work anyway.

Quote
it has some kind of condesor that plugs in to the wires that goes from the tach to the guage, but the wires are broke off on side of it so i didn't us it

Not really sure what you are saying is broken but if the gauge has broken parts that go to the tach I wouldn't count on it ever working.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18461
    • http://www.73-87chevytrucks.com
Re: dash tachometer
« Reply #2 on: October 08, 2008, 02:50:54 pm »
If you flip the cluster over the leads for the tach are clearly marked on it.
A 76-77 cluster is not the same as a 78-80 cluster.  The 76-77 version has a mechanical oil gauge on it.
FYI- I have probably swapped about 10 of these out.
Logged

Offline alex

  • Newbie
  • Posts: 49
Re: dash tachometer
« Reply #3 on: October 11, 2008, 07:38:40 am »
I saw an aftermarket kit that appears to have a factory style tachometer and gauges that will fit in the regular housing;has anyone installed one ......
Logged

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18461
    • http://www.73-87chevytrucks.com
Re: dash tachometer
« Reply #4 on: October 13, 2008, 11:20:53 am »
Where?  If it is Covan's Avoid it, they are surface mount and they lack structural support.
Logged

Offline alex

  • Newbie
  • Posts: 49
Re: dash tachometer
« Reply #5 on: October 15, 2008, 05:11:18 am »
ebay item 150302609159   ...company appears to be called gm sports......
Logged

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18461
    • http://www.73-87chevytrucks.com
Re: dash tachometer
« Reply #6 on: October 15, 2008, 05:54:15 pm »
Looks like someone modified factory gauges.  Never heard of them.
Logged

Offline SUX2BU99

  • Senior Member
  • ****
  • Posts: 1478
    • My Cardomain Site. Truck is on Page 6.
Re: dash tachometer
« Reply #7 on: October 17, 2008, 12:07:56 am »
^ That's an interesting product. From what I understand of reading the auction, the gauges are new and they put the faces and needles on to match the year that your truck is. And, they wire the tach independently (like any universal tach) so that anybody can wire it in regardless of your year or cluster. It looks like they take the factory printed circuit board right out of the equation.
Logged
85 Chevy Silverado C10 short, wide, yellow, 2wd. Lowered, 60-over 350 with Dart Iron Eagle heads and Comp Cams XE268 cam, TH350 w/ shift kit, 3.40 Gov-lok 12 bolt.

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18461
    • http://www.73-87chevytrucks.com
Re: dash tachometer
« Reply #8 on: October 17, 2008, 09:48:47 am »
Tachs don't use the printed circuit, the have a lead that comes straight off to power/coil/ground.
Logged

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: dash tachometer
« Reply #9 on: July 28, 2009, 03:25:41 pm »
Sorry to bring this up again, I remember seeing the auction when it was current.  I googled gm sports with no luck.  Anyone happen to have a link?
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19181
Re: dash tachometer
« Reply #10 on: July 28, 2009, 04:36:46 pm »
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: dash tachometer
« Reply #11 on: July 28, 2009, 04:45:52 pm »
Thanks Vile, got my bucket seats in the 86 C-10 and getting serious now.
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18461
    • http://www.73-87chevytrucks.com
Re: dash tachometer
« Reply #12 on: July 28, 2009, 04:52:32 pm »
This is their website:
http://gmsportssalvage.com

This is their ebay store (AFAIK)
http://motors.shop.ebay.com/merchant/gm_sports

BTW, I also have found The Tachman can fix the 73-75 tach along with the 76-up versions
http://www.tachman.com/oldsun.htm

Logged

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: dash tachometer
« Reply #13 on: January 23, 2011, 09:19:19 pm »
http://gmsportssalvage.com/?q=node/1530  in case anyone is interested...  This is the one I want.  Won't have to ditch my quartz clock and the gas gauge is right there...
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline jackjeckel757

  • Registered Users
  • *
  • Posts: 102
Re: dash tachometer
« Reply #14 on: January 24, 2011, 07:10:45 pm »
Quote from: zieg85 on January 23, 2011, 09:19:19 pm
http://gmsportssalvage.com/?q=node/1530  in case anyone is interested...  This is the one I want.  Won't have to ditch my quartz clock and the gas gauge is right there...

Looks like a nice tach/gas gauge and would fit right in with the stock gauges but its a little pricey.

Did you notice it said "Chevy and GMS trucks", I have never heard of a GMS truck.
Logged
Pages: [1] 2 3   Go Up
« previous next »