anyone run this cam before?

[84shortbed]

It`s a Crane SBC cam. Here is the link to the specs

http://cranecams.com/?show=browseParts&action=partSpec&partNumber=113932&lvl=2&prt=5

My 355 is 9.2:1 compression and I have Speed Pro flat top hypers. The heads are 882 heads that already had 2.02/1.6 valves in them when I got them. It`s going in my 84 step side.

[VileZambonie]

What is your goal? What intake do you have on it? Carb? Headers? what transmission and final drive gears do you have? I would go more aggressive personally.

[84shortbed]

It`s for my daily driver . I`m going to use a performer intake with egr and my original q-jet. I`m planning on headers eventually but I`ll run the stock exhaust manifolds for not. The tranny is a 700R4 with a stock converter which I don`t want to change and I don`t know the rearend ratio yet. I can`t go too wild because it has to pass CA smog. I haven`t had anything I had to smog in a long time and I usually go with a bigger cam and more compression but since I have to smog this I don`t know how big I can get away with.

[Captkaos]

I would look at a CARB exempt cam if you have to pass emissions.   

[84shortbed]

I would look at a CARB exempt cam if you have to pass emissions.   

It is a CARB cam.

CARB EO Number: D-225-18